User manual PIONEER DEH-7250SD

[. . . ] To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. Before You Start About this unit 3 In case of trouble 3 Demo mode 3 Reverse mode 3 Resetting the microprocessor 3 About this manual 4 Operating this unit Head unit 5 Remote control 5 Basic Operations 5 Use and care of the remote control 6 Menu operations identical for function settings/audio adjustments/initial settings/ lists 7 Tuner 7 ­ Basic Operations 7 ­ Storing and recalling stations 7 ­ Function settings 7 CD/CD-R/CD-RW and external storage devices (USB, SD) 8 ­ Basic Operations 8 ­ Displaying text information 9 ­ Using lists 9 ­ Advanced operations using special buttons 10 ­ Function settings 10 iPod 11 ­ Basic Operations 11 ­ Displaying text information 11 ­ Browsing for a song 11 ­ Advanced operations using special buttons 12 ­ Function settings 12 Audio Adjustments 13 ­ Advanced operations using special buttons 13 ­ Audio function settings 13 Before You Start About this unit Do not allow this unit to come into contact with liquids. [. . . ] If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated. 1 (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. 2 (subwoofer adjustment) When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. Only frequencies lower than those in the selected range are outputted from the subwoofer. HPF (high pass filter adjustment) When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 50Hz--63Hz--80Hz--100Hz--125Hz SLA (source level adjustment) SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust. The AM volume level can also be adjusted with source level adjustments. After selecting, perform the following procedures to set the initial setting. Language select (multi language) For your convenience, this unit equips multiple language display. Left or right to select the segment of the calendar display you wish to set. Left or right to select the segment of the clock display you wish to set. ) EngineTime alert (elapsed time display setting) This setting allows you to measure the length of time that elapses from when the machine is turned on and display the amount of elapsed time per set period. OFF--15Minutes--30Minutes FM step (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. if seek tuning is performed in 50 kHz steps , stations may be tuned in imprecisely. 50kHz (50 kHz)--100kHz (100 kHz) AM STEP (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). 10 KHZ (10 kHz)--9 KHZ (9 kHz) USB plug&play (plug and play) This setting allows you to switch your source to USB/ IPOD automatically. If you disconnect your USB storage device/iPod, this unit's source is turned off. Music browse (list setting) When using the external storage devices, you can search for the desired songs from the file/folder list or artist/album/song/genre category list. USB memory ­When a USB storage device is used, a song can be selected from the artist/ album/song/genre list. [. . . ] ) Playable folders: up to 1 500 Playable files: up to 15 000 Playback of copyright protected files: No Partitioned external storage device (USB, SD): Only the first playable partition can be played. There may be a slight delay when starting playback of audio files on an external storage device (USB, SD) with numerous folder hierarchies. Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. This unit may not operate correctly depending on the application used to encode WMA files. [. . . ]