User manual PIONEER DEH-6250BT

[. . . ] To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. Before You Start Information to User 3 About this unit 3 In case of trouble 3 Demo mode 3 Resetting the microprocessor 4 About this manual 4 Operating this unit Head unit 5 Remote control 5 Display indication 6 Basic Operations 6 Use and care of the remote control 7 Using Bluetooth telephone 8 ­ Setting up for hands-free phoning 8 ­ Basic Operations 8 Menu operations identical for function settings/audio adjustments/initial settings/ lists 9 Tuner 9 ­ Basic Operations 9 ­ Storing and recalling stations 9 ­ Function settings 9 CD/CD-R/CD-RW and USB storage devices 10 ­ Basic Operations 10 ­ Displaying text information 10 ­ Selecting and playing files/tracks from the name list 11 ­ Advanced operations using special buttons 11 ­ Function settings 11 iPod 12 ­ Basic Operations 12 ­ Displaying text information 12 ­ Browsing for a song 12 ­ Advanced operations using special buttons 13 This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). [. . . ] Returns you to the PIN code input display, and you can change the PIN code. Missed Calls (missed call history) DialledCalls (dialed call history) REC'D Calls (received call history) 1 Press M. To display Missed Calls (missed call history), DialledCalls (dialed call history) or REC'D Calls (received call history). 4 When you find a phone number that you want to store in memory, press and hold one of the preset tuning buttons (1 to 6). The phone book in your cellular phone will be transferred automatically when the phone is connected to this unit. Depending on the cellular phone, the phone book may not be transferred automatically. When you find a phone number that you want to store in memory, press and hold one of the preset tuning buttons (1 to 6). Important Be sure to park your vehicle and apply the parking brake when performing this operation. You can also press one of the preset number buttons 1 to 6 to select a number. After selecting, perform the following procedures to set the function. Phone FUNC (phone function) You can set Auto ANSR and Ring tone from this menu. If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be stored in Custom1. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated. After selecting, perform the following procedures to set the function. After selecting, perform the following procedures to set the audio function. This unit is equipped with a subwoofer output which can be turned on or off. SW setting 2 (subwoofer adjustment) The cut-off frequency and output level can be adjusted when the subwoofer output is on. Only frequencies lower than those in the selected range are outputted from the subwoofer. Adjustment range: +6 to -24 HPF setting (high pass filter adjustment) When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. SLA (source level adjustment) SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust. [. . . ] Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. This unit may not operate correctly depending on the application used to encode WMA files. There may be a slight delay when starting playback of audio files embedded with image data. Russian text to be displayed on this unit should be encoded with the following character sets: ! [. . . ]