User manual PIONEER DEH-3850MP

[. . . ] The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. The RDS function operates only in areas with FM stations broadcasting RDS signals. Always keep the volume low enough so you can hear sounds outside of the car. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. [. . . ] Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TTL (disc title) When you select DISC TTL, the title of the currently playing disc is shown in the display. When the multi-CD player performs the preparatory operations, READY is displayed. If the multi-CD player does not operate properly, an error message such as ERROR-11 may be displayed. If there are no discs in the multi-CD player magazine, NO DISC is displayed. You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. Only those functions described in this manual are supported for 50-disc multi-CD players. If you select other discs during repeat play, the repeat play range changes to MCD. If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)RDM (random play) SCAN (scan play)ITS-P (ITS play)PAUSE (pause)COMP (compression and DBE) Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, MCD and DSC. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play. Playback begins of those tracks from your playlist within the previously selected MCD or DSC ranges. # If there are no tracks from your playlist in the current range, EMPTY is displayed and normal play resumes. When you want to delete all tracks of a CD from your ITS playlist, you can if ITS play is off. # If no tracks in the current range are programmed for ITS play then EMPTY is displayed. Playback will continue in normal order from the currently playing track and CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Press b to erase all tracks on the currently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and CLEAR is displayed. Each press of b will display a letter in the reverse order, such as Z Y X . [. . . ] When AF or TA is on, the tuning step automatically changes to 100 kHz. If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. Pressing a or b will turn WARN on or off and that status will be displayed (e. Activate the auxiliary setting when using auxiliary equipment connected to this unit. [. . . ]