User manual PIONEER DEH-1770

[. . . ] 3 Put the front panel into the protective case provided for safe keeping. 2 Press the front panel into the face of the head unit until it is firmly seated. Protecting your unit from theft The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. 7 c/d buttons Press to do manual seek tuning, fast forward, reverse and track search controls. [. . . ] The tuner will scan the frequencies until a broadcast strong enough for good reception is found. Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 16. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in the order of their signal strength. Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. # If you perform track search or fast forward/reverse, repeat play is automatically cancelled. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)BASS (bass adjustment)TREBLE (treble adjustment) LOUD (loudness)SLA (source level adjustment) # When selecting the FM tuner as the source , you cannot switch to SLA. # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. There are five stored BTB settings such as DYNAMIC, POWER, MAX, CUSTOM and FLAT that can easily recall at any time. When FLAT is selected no supplement or correction is made to the sound. This is useful to check effect of the BTB settings by switching alternatively between FLAT and set BTB setting. Press BTB repeatedly to switch between the following BTB setting: POWERMAXCUSTOMFLAT DYNAMIC You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the FM tuner volume level, which remains unchanged. The AM tuner volume level can also be adjusted with source level adjustments. Initial settings lets you perform initial setup of different settings for this unit. [. . . ] If you think that condensation is a problem turn off the CD player for an hour or so to allow it to dry out and wipe any damp discs with a soft cloth to remove the moisture. CD player and care When CD-R/CD-RW discs are used, playback is possible only for discs which have been finalized. It may not be possible to play back CD-R/ CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly. [. . . ]