User manual PIONEER DEH-1250MP

[. . . ] If a track number 100 or more is selected, d on the left of the track number indicator will light. Operating this unit Use and care of the remote control Using the remote control 1 Point the remote control in the direction of the front panel to operate. When using for the first time, pull out the film protruding from the tray. Replacing the battery 1 Slide the tray out on the back of the remote control. [. . . ] Incompatible text stored with the audio file may not be displayed or may be displayed incorrectly. Depending on the version of iTunes used to write MP3 files onto a disc, comment information may be incorrectly displayed. When playing back VBR (variable bit rate)-recorded WMA files, the average bit rate value is displayed. Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. FF/REV (fast forward/reverse) You can switch the search method between fast forward/reverse and searching every 10 tracks. FF/REV ­ Fast forward and reverse ROUGH ­ Searching every 10 tracks To select FF/REV, press c. If the rest of track number is less than 10, press and hold c or d recalls the first (last) one. SLA (source level adjustment) SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust. The AM volume level can also be adjusted with source level adjustments. After selecting, perform the following procedures to set the audio function. Adjustment range (front/rear): FAD F15 to FAD R15 FAD 0 is the proper setting when only two speakers are used. After selecting, perform the following procedures to set the initial setting. The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. 50 (50 kHz)--100 (100 kHz) AM (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). 10 (10 kHz)--9 (9 kHz) AUX (auxiliary input) Activate this setting when using auxiliary device connected to this unit. Turning the clock display on or off % Press CLOCK to turn the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Wiring that comes into contact with metal parts to protect the wiring. -- Place all cables away from moving parts, such as the gear shift and seat rails. -- Place all cables away from hot places, such as near the heater outlet. [. . . ] There may be a slight delay when starting playback of audio files embedded with image data. The user cannot assign folder numbers and specify playback sequences with this unit. MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i. Revenuegenerating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/ or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. [. . . ]