User manual PIONEER DEH-434R OPERATION MANUAL

[. . . ] If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station. 3 Put the front panel into the protective case provided for safe keeping. 2 Press the front panel into the face of the head unit until it is firmly seated. 4 a/b/c/d buttons Press to do manual seek tuning, fast forward, reverse and track search controls. [. . . ] If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 14). If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button. % When you find a frequency that you want to store in memory press a preset tuning button 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory. Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 16. Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 16. Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 2 When you want to return to normal seek tuning, press LOCAL/BSM to turn local seek tuning off. BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. Each press of c or d selects level in the following order: LOW (low)MID (mid)HI (high) Note You can also turn loudness on or off by pressing LOUDNESS. SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. Note The AM tuner volume level can also be adjusted with source level adjustments. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. Function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Initial settings lets you perform initial set up of different settings for this unit. Press AUDIO repeatedly to switch between the following settings: ClockFM 100 (FM tuning step)AM 9 (AM tuning step) Use the following instructions to operate each particular setting. # You can also cancel initial settings by holding down AUDIO until the unit turns off. Turning the clock display on or off You can turn the clock display on or off. [. . . ] Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. Keep discs out of direct sunlight and do not expose the discs to high temperatures. Do not attach labels, write on or apply chemicals to the surface of the discs. To clean dirt from a CD, wipe the disc with a soft cloth outward from the center of the disc. [. . . ]