User manual PIONEER DDJ-SP1

[. . . ] Com/ The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. The contents of the warranty for the United States and Canada are provided on the last pages of the instructions in English and French. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_A1_En Operating Environment Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light). [. . . ] 3 Turn on the power of the Serato DJ-certifiable DJ mixer or DJ controller. When using Windows 7 From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato] > [Serato DJ]. 1 1 5 4 5 4 5 4 1 This displays the currently selected type of effect. 3 The number of the deck to which that effects unit is assigned is highlighted. 1 Press the [FX ASSIGN] button on the left side to select the deck to which the effect is to be assigned. 1 3 1 SLIP SYNC 2 2 ON 3 4 2 2 4 Playing tracks Operate the DJ player, analog player, DJ controller, etc. For instructions on operating the Serato DJ software and the Serato DJ-certifiable DJ mixer or DJ controller, see their respective operating instructions. Using the performance pads The performance pads control the hot cue, hot loop, loop roll, auto loop, slicer, manual loop and sampler functions. These functions are switched using the respective pad mode buttons (the [HOT CUE] mode button, [ROLL] mode button, [SLICER] mode button and [SAMPLER] mode button). For instructions on using other pad modes, see this unit’s Operating Instructions (Advanced Edition). Press the [FX ASSIGN] 1 button to assign the effect to deck 1, the [FX ASSIGN] 2 button to assign the effect to deck 2. Press the [FX ASSIGN] 1 button while pressing the [SHIFT] button to assign the effect to deck 3, press the [FX ASSIGN] 2 button while pressing the [SHIFT] button to assign the effect to deck 4. To apply the effects to the overall (master) sound, click [M] on the computer. 2 Press the effect parameter 1 button while pressing the [SHIFT] button to select the first effect type. To select the second effect type, press the effect parameter 2 button while pressing the [SHIFT] button. To select the third effect type, press the effect parameter 3 button while pressing the [SHIFT] button. The [HOT CUE] mode button lights and the mode switches to the hot cue mode. ON FX SELECT 1 3 1 2 4 2 2 In the play or pause mode, press a performance pad to set the hot cue point. ON FX SELECT ON FX SELECT TAP FX MODE 3 4 The currently selected effect type is displayed on the Serato DJ screen. 1 3 1 2 4 2 ON FX SELECT ON FX SELECT ON FX SELECT TAP FX MODE 3 4 The [ON] button of the corresponding effect is highlighted on the Serato DJ screen. 6 En 4 Operate the effect parameter 1 control to adjust the parameter of the first effect. Operate the effect parameter 2 control to adjust the parameter of the second effect. [. . . ] For hard-toremove stains, soak a soft cloth in a neutral detergent diluted with 5 to 6 times of water, wring it thoroughly, wipe off the stains, and wipe the surface with a dry cloth again. Do not use alcohol, thinner, benzene, or insecticide, as these may peel off the printed label or the coated film. Avoid leaving rubber or vinyl products in contact for an extended period of time, as this may also damage the surface of the cabinet. The names of companies and products mentioned herein are the trademarks of their respective owners. [. . . ]