User manual PIONEER CX-J510

[. . . ] Always keep the volume low enough so that you can hear sounds from outside the vehicle. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station. 01 audio-on-demand applications. Inquire at the manufacturer about your USB portable audio player/USB memory. [. . . ] See step 1 to 5 on Calling a number in the phone book on the previous page for how to do this. Turning MULTI-CONTROL switches input screens in the following order: EDIT NUMBER (number edit screen)-- EDIT GENRE (genre edit screen)--CLR MEMO (clear memory screen) 4 Push MULTI-CONTROL right to show a confirmation display. CLEAR MEMORY YES is displayed. # If you do not want to clear the memory that you have selected, push MULTI-CONTROL left. The display reverts to normal. 6 Press MULTI-CONTROL to store the new number. After the number is stored, the display reverts to the detailed list. Assign genres to phone numbers If there are a lot of entries in the Phone Book it can be useful to assign them to specific genres (categories) for easier searching. There are four preset genres that you can assign entries to: HOME, MOBILE, OFFICE and OTHERS. See step 1 to 5 on Calling a number in the phone book on the previous page for how to do this. 32 En Section Operating this unit 5 Press MULTI-CONTROL to delete the Phone Book entry. 6 Turn MULTI-CONTROL to select the first letter of the name you are looking for. # You can also perform the same operation by pushing MULTI-CONTROL up or down. 02 Operating this unit Using preset numbers Numbers that you dial frequently can be assigned to presets for quick recall. 7 Press MULTI-CONTROL to display entries. The display shows the first three Phone Book entries starting with that letter (e. g. "Ben", "Brian" and "Burt" when "B" is selected). 8 Turn MULTI-CONTROL to select a phone book entry you want to store in the preset list. # You can also perform the same operation by pushing MULTI-CONTROL up or down. NAME VIEW (phone book name view) --MENU (menu language)--DEVICE INFO (device information) If not connected yet The following functions cannot be operated. !NAME VIEW (phone book name view) within about 30 seconds, the display automatically returns to the ordinary display. 02 Operating this unit Downloading phone books from your cellular phone Phone books in your cellular phone can be downloaded and stored in this unit. 3 Press MULTI-CONTROL to enter in the phone book download standby mode. When phone book download is completed, DATA DOWNLOADED is displayed. # The display indicates how many entries have been transferred and the total number to be transferred. # If the ID and the password are requested, refer to Entering the ID and the password on this page. If connected but not paired yet The following functions cannot be operated. !You can also select the function by pressing FUNCTION on the remote control. If cellular phone is connected to this unit via Bluetooth wireless technology with HFP (Hands-Free Profile), PBAP (Phone Book Access Profile) and SPP (Serial Port Profile), PH BOOK DOWNLOAD can be operated. If you do not operate functions other than PH BOOK DOWNLOAD, PH BOOK TRANSFER, and NUMBER DIAL Entering the ID and the password If the ID and the password are requested, read the following instructions to enter the ID and the password. Up to 20 characters can be entered for the ID and up to 16 characters can be entered for the password. Press DISP repeatedly to switch between the following character types: Alphabet--Numbers and symbols 2 Push MULTI-CONTROL up or down to select a letter. En 35 Section 02 Operating this unit 3 Push MULTI-CONTROL left or right to move the cursor to the previous or next character position. 5 After entering the ID and password, use your cellular phone to continue the procedure. [. . . ] 7, 7. 1, 8, 9, 10, 11 (2ch audio) (Windows Media Player) AAC decoding format . . . . . . . . . . . . Linear PCM & MS ADPCM (Non-compressed) USB Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mA Maximum amount of memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 7. 1, 8, 9, 10, 11 (2ch audio) (Windows Media Player) AAC decoding format . . . . . . . . . . . . [. . . ]