User manual PIONEER CT-40 service manual

[. . . ] After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. This product complies with the Low Voltage Directive (73/23/EEC), EMC Directives (89/336/EEC, 92/31/ EEC) and CE Marking Directive (93/68/EEC). Checking what's in the box Thank you for buying this Pioneer product. [. . . ] You can use either of the repeat modes together with the random play mode. Setting the repeat mode to REPEAT ALL endlessly plays all the tracks on the disc at random. You can choose to display various kinds of information during playback and stop modes. When a disc is stopped TOTAL TIME - displays the number of tracks and the total playing When a disc is playing Elapsed track time (default) - displays the track number and the time elapsed TRACK REMAIN - displays the track number and track time still * In random play mode, the ALL REMAIN display is not available. 4 Choose a station preset in which to save the station's frequency. Note: Station presets remain memorized for several days if the system is disconnected from the power outlet. After this time, station presets are lost and you'll have to reprogram them. You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. After you've set a station preset you can give it a name so you can remember which is which. The following instructions assume that you are already familiar with tuning into radio stations--turn back to page 30 for detailed tuning instructions. When using the TUNER button to switch between FM and AM, you've probably noticed a third option. You can choose to display various kinds of information when listening to the tuner. Remember that RDS information is only available when listening to FM stations. If the station you're listening to is not transmitting any RDS information, you'll see the message NO DATA in the display. If you selected PTY and the display shows NO TYPE, the display will revert automatically to the program service name after about 5 seconds. In some regions or countries, the default tuning frequency interval may not be suitable. If you find that you can't tune into stations properly (it sounds 'almost' tuned in), try switching to the alternate tuning frequency interval. The auto-reverse feature lets you play or record both sides of the tape without physically taking it out and turning it over. Dolby B NR reduces tape hiss on tapes recorded using Dolby NR (which includes almost all commercially recorded tapes). Auto tape select means that the deck automatically detects the type of tape you're playing--normal (type I) or high-position/CrO2 (type II)--so there's no need to check the tape type and switch manually. Here, we'll run through the basic tape deck controls; instructions for other features, such as recording, start on page 51. Use a tape that's already recorded on so you can hear something in the following steps! [. . . ] By default, when you press OPEN/CLOSE to open or close the disc compartment, you'll hear a beep. If you would prefer not to, here's how to switch it off: Remember: switch between menu options using 4 and ¢; select the option by pressing SET. Depending on the component that you connect to the auxiliary inputs, it's possible that the signal level will be too high for this system to play properly without the sound distorting. If you notice distortion when listening to the auxiliary component, try switching the attenuator on. [. . . ]