User manual PIONEER CT-30 service manual

[. . . ] Dolby noise reduction manufactured under license from Dolby Laboratories. Please read through these operating instructions so you will know how to operate your model properly. [. . . ] After you have finished reading the instructions, put them away in a safe place or future reference. In some countries or regions, the shape of the power plug and power outlet may differ from that shown in the explanatory drawings. This component cannot be operated alone; please use in combination with the CD Tuner System XC-F10 and Power Amplifier M-F10. these supplementary operating instructions contain information relating to connections and specifications for the Pioneer stereo cassette deck CT­F10. For information on cassette tape maintenance, actual operating procedures, and troubleshooting regarding this component consult the main Operating Instructions included with the CD Tuner System (sold separately). Line up the tab on Stand B with the center hole on Stand A and slot it into place. If you are going to wall-mount the unit, see Wall-mounting your system of the main Operating Instructions. Important Pioneer bears no responsibility for accidents resulting from faulty assembly or installation, insufficient mounting strength of walls or other building fixtures, misuse or natural disasters. IMPORTANT: Never connect or disconnect the system ribbon cables while the power plug is connected to the wall outlet. To insert, hold the connector and push firmly into the socket until you hear it click home. [. . . ] To insert, hold the connector and push firmly into the socket until you hear it click home. To remove, hold the connector securely on either side with thumb and forefinger and pull out from the socket. [. . . ]