User manual PIONEER CS-R300 service manual

[. . . ] This unit can control previous generations iPod models with a Pioneer iPod adapter (e. In this case, most functions are essentially the same as an iPod connected to USB interface of this unit. Also, damage to this unit, smoke, and overheating could result from contact with liquids. Always keep the volume low enough so that you can hear sounds from outside the vehicle. [. . . ] Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 24). If you change this setting, subwoofer output in the audio menu return to the factory settings. You need to activate the BT AUDIO source in order to use a Bluetooth audio player. The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. You can also turn on or off feature demo by pressing DISP while this unit is turned off. To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. With some Bluetooth audio players, you may be required to enter the Bluetooth audio player PIN code in advance to set this unit for a connection. Should this unit connecting Bluetooth adapter fails to operate properly and you consult your dealer for repair, you may be asked to indicate the system version and Bluetooth module version of the adapter. Up to two auxiliary devices such as VCR or portable devices (sold separately) can be connected to this unit. When connected, auxiliary devices are automatically read as AUX sources and assigned to AUX1 or AUX2. When you are talking on a cellular phone connected to this unit via Bluetooth wireless technology, song playback from your Bluetooth audio player connected to this unit is muted. Even if while you are listening to a song on your Bluetooth audio player and you switch to another source, playback of song continues. Playing songs in a random order (shuffle) ALBUMS ­ Play back songs from a randomly selected album in order. Note You can also perform this operation in the menu that appears by using MULTI-CONTROL. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. This section provides brief information on Bluetooth audio player operations with this unit, which slightly differs or is abbreviated from that described in the Bluetooth adapter's operation manual. Even though your audio player does not contain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technology. To control your audio player using this unit, connect a product featuring Bluetooth wireless technology (available on the market) to your audio player and connect the Bluetooth adapter (e. CDBTB100) to this unit, you can control Bluetooth audio players via Bluetooth wireless technology. Depending on the Bluetooth audio player connected to this unit, the operations available with this unit are limited to the following two levels: -- Lower level: Only playing back songs on your audio player is possible. Since there are a number of Bluetooth audio players available on the market, operations with your Bluetooth audio player using this unit vary in great range. [. . . ] Do not let the USB portable audio player/USB memory fall onto the floor, where it may become jammed under the brake or accelerator pedal. There may be a slight delay when starting playback of audio files encoded with image data. Depending on the USB devices connected to this unit, it may generate noise in the radio. Only 32 characters from the beginning can be displayed as a file name (including the extension) or a folder name when USB portable audio player/USB memory is selected as a source. [. . . ]