User manual PIONEER CP-7EX

[. . . ] This speaker stand should only be used with the S-7EX Pioneer speaker system. Please read through these operating instructions for proper assembly and use. [. . . ] Adjust the position as necessary to obtain optimal sound from your system. Make sure you assemble the stand on a flat surface that is relatively soft (such as a carpet). â· Make sure the screws are inserted in the screw holes as shown above (with the screw head hidden) when securing the speaker. Improper setup could result in damage or injury if the speaker falls from the stand. The speaker stand includes spikes that you can use to isolate the speaker from the floor. Spikes are recommended when placing the stand on a thick carpet (for added stability), or for better sound when placing the stand on a hard reverberant surface (such as a concrete or wood floor). Use the supplied spike bases to avoid scratching the floor or other surface where the stand is placed. Note that there are fastening nuts provided on the speaker base (see below). Before placing the speaker on the speaker stand, make sure the stand is stable and resting squarely on all four spikes. â· If the cabinet or stand is very dirty, use a soft cloth dipped in some neutral cleanser diluted 5 or 6 times with water. [. . . ] For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. [. . . ]