User manual PIONEER CLD-V850

[. . . ] Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. [. . . ] To cancel repeat play: Press the PLAY MODE button repeatedly until "Normal" appears and " " disappears. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button. To play back MP3/WMA (Windows Media Audio) file There are many music sites on the internet that you can download MP3/WMA (Windows Media Audio) music files. Follow the instructions from the website on how to download the music files. You can then play back these downloaded music files by burning them to a CD-R/RW disc. Any other usage of the song without owner's permission, is against the law. About folder playback order If MP3/WMA files are recorded in several folders, a folder number will be set to each folder automatically. These folders can be selected by the FOLDER button on the remote control. If there is no supported file formats inside the selected folder, the folder is skipped and the next folder will be selected. Example: How to set folder number if MP3/WMA format files are recorded as below figure. 3 Press the MEMORY button to save the folder and track B), the folder which is recorded earlier on the disc will be set as folder 2 and folder 3. 14 Note: If USB memory device is not connected, "No USB" will be shown on the display. 1 kHz, 48 kHz) l Playback order for MP3 files may differ depending on the writing software used during file download. L The display playback time may not be displayed correctly when playing back a variable bitrate file. l The ID3TAG information supported are TITLE , ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode. l WMA meta tag also supports title , artist and album name which are recorded in WMA files. Notes: l PIONEER will not be held liable for the loss of data whilst the USB memory device is connected to the audio system. L Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal. L PIONEER cannot guarantee that all USB memory devices will work on this audio system. L USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system. [. . . ] 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. Factory reset, clearing all memory 1 Press the STANDBY/ON button to enter the power 2 Disconnect the power plug from the outlet. Audio from the iPod/iPhone cannot be heard via the headphones connected to the unit. [. . . ]