User manual PIONEER CDX-P25

[. . . ] When playing a CD TEXT disc on this product, display of Title indications in the head unit's display is possible. The tracks containing the track skip information are skipped over automatically. Do not put the magazine in a place where it will be exposed to high temperatures or direct sunlight. The use of benzine, thinner, insecticide, or other volatile chemicals may damage the magazine surface. [. . . ] Seal After removing the transport screws, cover the hole with the supplied seal. Align the disc tray with the left and right grooves, and push it in until you hear it click. Transport screw Attach to the original position before transporting the set. If the tray is not aligned with the right and left grooves, it cannot be pushed to the end. If you load a disc with the label generally printed in black facing down, not only will the player not be able to recognize whether the disc is set or not, but also, if you have a multi-CD controller, the controller will not display an error message to let you know about it. So make sure all the discs in each magazine have their label sides facing up. Do not put your fingers in the magazine tray as this may lead to incorrect operation and damage to the player. If the label on the magazine is coming off or wrinkled up, it may damage the eject mechanism, and in some cases, the magazine may not be ejected. The entry of dirt, dust, or any other foreign matter into the player may cause it to fail. A transport screw has been attached to the set in order to protect it during transportation. Specifications and design are subject to possible modification without prior notice due to improvements. Yellow To the terminal always supplied with power regardless of ignition switch position. Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. Mounting the player on the mounting board with self-tapping screws/ Installazione dell'apparecchio sul pannello di montaggio con viti autofilettanti/ Fixation du lecteur sur une platine à I'aide de vis autotaraudeuses Mounting parts/Pezzi per l'installazione/Pièces de fixation Refer to the following illustrations of mounting parts when mounting the player. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. When mounting the player, make sure none of the leads are trapped between the player and the surrounding metalwork or fittings. location · Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. [. . . ] Be sure to mount the player on a rigid surface which is firm enough to hold the player in the proper position under all circumstances. Before drilling a hole into the trunk, confirm that there is nothing behind the hole. Do not mount the player near the heater outlet, where it would be affected by heat, or near the doors, where rainwater might splash onto it. Do not mount the player on the spare tire board or any other unstable place. [. . . ]