User manual PIONEER CDJ-350

[. . . ] The Pioneer website listed above provides answers to frequently asked questions, information about software, and other up-to-date data of assistance to our customers. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] Do not force discs into the set's disc insertion slot when the set's power is off. When the disc is being drawn in or ejected, do not apply any force to the disc in the direction opposite its movement. When auto cue is turned on, playback starts when [PLAY/PAUSEf] is pressed. The entire graph flashes slowly when the remaining track time is under 30 seconds, then flashes quickly when the remaining track time is under 15 seconds. If you press [hDISC] by mistake, press [PLAY/PAUSEf] immediately to restore this unit to the status it was in just before [h DISC] was pressed. If the disc is not ejected when [h DISC] is pressed, eject the disc forcibly by inserting the disc force eject pin into the disc force eject pin insertion hole. When forcibly ejecting a disc, be sure to do so following the procedure below. 1 Press [u] 1 to turn this unit's power off, then wait at least 1 minute. Never forcibly eject a disc directly after turning off the set's power. The disc will still be spinning when ejected and could hit your fingers, etc. Also, the disc clamp will rotate in an unstable way, and the disc could get scratched. About the power switch of this unit To turn the power on Press [u] 1. When the pin is inserted all the way into the insertion hole, the disc is ejected 5 mm to 10 mm out of the disc insertion slot. To set to the standby mode When this unit's power is on, press [u] 1 for at least 1 second. Be sure to follow the procedure below when removing USB devices from the set. Removing a USB device without following this procedure could erase the set's management data and make it impossible to read the USB device. When turning the set's power off, be sure to remove the USB device first. To move to lower layers in a folder, select the folder then press the rotary selector. When a disc containing music files recorded with a hierarchical structure is loaded, playback starts from the tracks in the uppermost level. Resuming playback from the position playing just before the disc was ejected (Resume) After ejecting the disc, immediately reload that same disc into this unit. The resume function only works when the same disc is ejected then reloaded before loading another disc. When [o] is pressed, playback returns to the beginning of the currently playing track. [. . . ] Using the support site Before making an inquiry about rekordbox operations and technical support, refer to the operating instructions for rekordbox and check the FAQs published on the support site for rekordbox. Water droplets (condensation) may form on the surface of discs if they are moved from a cold place (particularly in winter) into a warm room. Carefully wipe the water droplets off the surface of the disc before loading it. To make an inquiry about rekordbox, you need to register as a user in advance on the support site for rekordbox. [. . . ]