User manual PIONEER CDJ-200

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] The indicator on the CUE button will light, the PLAY/PAUSE button (6) indicator will flash and the player will then wait for the PLAY/ PAUSE button (6) to be pressed before beginning playback of the next track. When the Auto Cue function is turned off, playback will begin automatically from the first track. ¶ When Auto Cue function is turned off, playback will continue after the first track has been played, with all subsequent tracks being played in sequence. ¶ When playback of the final track is complete, playback will automatically come to an end. When playing MP3s, after the playback of all the tracks inside a folder has finished, the unit will enter the standby mode at the end of the final track. When the PLAY/PAUSE button (6) is pressed, playback will begin from the first track of the same folder. When the same disc is inserted after being ejected once, the disc will be restarted from the place immediately before the disc was ejected. If desired, the TRACK SEARCH button can be pressed before playback begins to perform normal track search and playback. ¶ In the event the EJECT button (0) is pressed accidentally, immediately (before [EJECT] is displayed in the display) press the PLAY/PAUSE button (6) to cancel the eject command; playback will then restart from the place immediately before the EJECT button (0) was pressed (during this time, sound output will be temporarily interrupted). ¶ When the PLAY/PAUSE button (6) is pressed again, the indicator on the button will light and the playback will continue. ¶ Broken sound will still be audible during the pause mode; to stop all sound, lower the output sound volume of the audio mixer. ¶ If there has not been any operation for more than 100 minutes in the pause mode, the disc rotation will automatically be stopped. By pressing the PLAY/PAUSE button (6), the playback will be resumed from the first track. ¶ The track will accelerate (FWD+ =Clockwise)/slowdown (REV­ =Counter-Clockwise) according to the amount and direction the jog dial is turned. the rate of change is up to ±20 % (essentially linear change). ¶ When jog dial rotatation stops, the speed returns to the speed before the jog dial was first rotated. ¶ Pitch Bend is disabled when the Digital Jog Break function is turned ON. ¶ Searches frames in the play direction when rotated clockwise, and the reverse direction when rotated counter-clockwise. ¶ During playback of MP3s, fast-forward/fast-reverse are supported only for tracks inside the same folder. ¶ Hold down one of the SEARCH buttons (1, ¡) while turning the jog dial in the desired direction to enter super-fast forward or super-fast reverse mode. ¶ During Super-Fast search, the search direction is determined by the direction the jog dial is turned. ¶ When the jog dial rotation stops, the unit returns to playback mode. [. . . ] Switch OFF TV set, move player away from TV set or plug the player into a separate outlet. During playback of MP3s, back cue is possible only within the same folder. During playback of MP3s, looping is possible only within the same track that has a cue point (loop-in point) set. Turn off POWER switch of the player, or move the player away from the TV or tuner. [. . . ]