User manual PIONEER BDP 51FD & BDP-51FD,MV

[. . . ] Com manuals search engine Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] € If the playback cannot be stopped, press  STANDBY/ON on the player’s front panel to turn off the power, then turn the power back on. € If the power cannot be turned off, press and hold  STANDBY/ON on the player’s front panel for over 5 seconds. Read the operating instructions of the connected components and switch to the proper input. Press VIDEO SELECT to switch the terminal from which the video signals are output. Depending on the player’s output video resolution, the picture may not be displayed at all or displayed properly. Use OUTPUT RESOLUTION to switch to a resolution at which the picture is displayed properly (page 25). Picture freezes and the front panel and remote control buttons stop working. Is the input setting on the connected TV or AV receiver or amplifier right?Is the player connected with an HDMI cable other than a High Press  while pressing  on the player’s front panel to restore Speed HDMI™ cable (with a Standard HDMI™ cable)?There are some BDs for which the picture will only be output when connected by HDMI cable. Read the TV’s operating instructions and set the TV’s aspect ratio properly. € When video signals with a resolution of 1080/60i, 1080/60p, 1080/24p or 720/60p are being output from the HDMI OUT terminal or the COMPONENT VIDEO output terminals, they may be output in the 16:9 (Widescreen) mode even if TV Aspect Ratio is set to 4:3 (Standard) (page 25). Com manuals search engine 07 Problem Picture is disturbed during playback. Check Remedy • This player supports Macrovision analog copy protection technology. With some TVs (such as with built-in video deck), the picture will not be displayed properly when the copy protected DVD title is played. € If the player and TV are connected via a DVD recorder/video deck, etc. , the picture will not be displayed properly due to analog copy protection. With some content protected discs, it may not be possible to output the video signals from the VIDEO output terminals, the S-VIDEO output terminal or the COMPONENT VIDEO output terminals. No picture is displayed or picture is not output in high definition when playing BDs. No sound is output during slow motion play and forward and reverse scanning. Is the player properly connected to the other components (AV • Check that you connect the player to the audio output receiver or amplifier, etc. € Check that you connect the player to the PHONO input terminals of the AV receiver or amplifier, etc. [. . . ] If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. [. . . ]