User manual PIONEER AVIC-F500BT

[. . . ] · When program updating is completed, the Navigation System will be re-booted. After the system has booted up, make sure not to turn off the power supply for the Navigation System until the map of your surroundings appears. · In the worst possible case, there is the risk of data in the Address Book being lost. It is therefore recommended to use a PC Card (PCMCIA TYPE II <5 V>) to back up Registered Location(*) data. [. . . ] 7 Select "Done" and click the OK button. 4 Utilising Various Information On this screen, you can select the following items: Select another picture : This is selected when you want to change to another picture. Return to Step 4. Change to another background : The Background Picture Setting menu reappears. Click the OK button to return to "Settings" menu. 83 sChanging background picture stored on a disc (AV Background only) 1 Select "Settings", "Background Picture Setting" from the Main menu, and click the OK button. The picture selected at each screen is indicated on the right side of "AV Background" and "Navigation Background" items. If you want to install a picture directly from PC card, refer to Step 4 onwards in "Selecting a picture stored in PC card". Select a picture you want for the background, and click the OK button. 2 3 The message whether or not to set the picture being selected appears. Selected picture is set. Only JPEG format (". jpg") pictures can be used as a background picture. You can only use standard characters (alphabets of both cases: A-Z, a-z) and numbers (0 9) for the file name of a background picture (international (accented) characters cannot be used). We cannot guarantee a proper operation for a picture bigger than this size. When storing original pictures in a PC card, create a folder named "BG" in a PC card, and store the picture files in this folder. When changing a picture starts, do not cut off the vehicle engine until the message informing the completion of changing a picture is indicated. Please also check whether they are connected in the correct positions. 1 Select "Information" in the Main menu, then select "Location Status" and "Connection Status". Either "OK" or "No good" appears on the screen, and connection status of each cable is shown. 1 2 3 4 5 6 7 Chapter 4 Utilising Various Information 87 1. Speed Pulse The number of the Speed Pulse detected by this unit is shown. GPS Aerial The connection status of GPS aerial and the sensitivity are shown. If "No good" is displayed, check the connection status of GPS aerial. Installation Position The Installation position of the main unit is shown. If "No good" is displayed, refer to "Installation Manual" for the installation position. Hand brake When the handbrake is applied, "On" is displayed. Keep the foot brake on while checking that the parking brake connection works properly. Power Voltage The power supply (reference value) provided from the vehicle battery to this unit is shown. [. . . ] · Pioneer does not bear responsibility for changes to information services provided by broadcasting stations or by related companies, such as cancellation of the services or changing to payservices. Also, we do not accept return of the product for this reason. 174 Copyright ©1993-2001 Navigation Technologies B. All rights reserved France: Sourcé: Géoroùte ® IGN France & BD Carto ® IGN France Germany: Die Grundlagendaten wurden mit Genehmigung der zuständigen Behörden entnommen. Great Britain: Based upon Ordnance Survey electronic data and used with the permission of the Controller of Her Majesty's Stationary Office © Crown Copyright, 1995 Italy: La Banca Dati Italiana é stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana. [. . . ]