User manual PIONEER AVH-P5000DVD INSTALLATION MANUAL

[. . . ] € In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this unit’s DVD features should not be used. 1 Note: • This unit cannot be installed in a vehicle without ACC (accessory) position on the ignition switch. ACC • OF OF F O N F O N • ACC position • No ACC position • • • Use this unit in other than the following conditions could result in fire or malfunction. [. . . ] , CD-I200) (sold separately) 80 cm IP-BUS input (Blue) IP-BUS cable Multi-CD player (sold separately) 80 cm Español Tuner box (supplied) Antenna cable Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on (supplied) that piece of equipment. Note: • The position of the parking brake switch depends on the vehicle model. This lead must be connected to the power supply side of the parking brake switch. The pin position of the ISO connector will differ depending on the type of vehicle. Notes: • Change the initial setting of this unit (refer to the Operation Manual). € When using a subwoofer of 70 W (2 Ω) , be sure to connect with Violet and Violet/black leads of this unit. PyÒÒÍËÈ 6 Connecting the Units When connecting to separately sold power amp This product Rear output or subwoofer output (REAR/SUBWOOFER/DEQ OUTPUT) 15 cm Front output (FRONT OUTPUT) 15 cm Blue/white Connect to system control terminal of the power amp (max. The pin position of the ISO connector will differ depending on the type of vehicle. , DEQ-P6600) to this unit, do not connect anything to the speaker leads and system remote control (blue/white). When you connect the multi-channel processor to this unit, refer to multi-channel processor’s installation manual for the connection method. 7 English Power amp (sold separately) Español Power amp (sold separately) Deutsch Connect with RCA cables (sold separately) Français System remote control Left + + Right Front speaker ≠ ≠ Front speaker Italiano Nederlands Rear speaker or subwoofer + ≠ + ≠ Rear speaker or subwoofer Perform these connections when using the optional amplifier. PyÒÒÍËÈ Note: • Change the initial setting of this unit (refer to the Operation Manual). 8 Connecting the Units When connecting with a rear view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). € The rear view camera function is to be used as an aid for backing into a tight parking spot. € Objects in the rear view may appear closer or more distant than they actually are. Rear view camera 20 cm 15 cm RCA cable (sold separately) To video output Fuse resistor Violet/white Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards. Note: • It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when connecting the rear view camera. 9 When connecting with a multi-channel processor This product 25 cm Video input (VIDEO INPUT) IP-BUS input (Blue) Blue DEQ output (REAR/ SUBWOOFER/DEQ OUTPUT) English IP-BUS cable (supplied with DVD player) Español Black 15 cm Optical cable (supplied with multi-channel processor) Optical cable (sold separately) Blue Black RCA cable (supplied with multi-channel processor) DVD player (e. , XDV-P6) (sold separately) Optical cable connection box (supplied with multi-channel processor) Deutsch Français Hide-away unit (supplied with DVD player) Blue Front video output (Yellow) Black Black Italiano Multi-channel processor (e. , DEQ-P6600) (sold separately) 25 pin cable (supplied with DVD player) RCA cable (supplied with DVD player) Black Blue IP-BUS cable Nederlands IP-BUS cable (supplied with multi-channel processor) When you connect a separately sold DVD player to the separately sold multi-channel processor, the optical cable from DVD player must be connected to the optical cable 2 input (OPT. Multi-CD player (sold separately) PyÒÒÍËÈ You can use only one video component with this unit. [. . . ] Do not install this unit where: — it may interfere with operation of the vehicle. italiano Nederlands Side bracket (large) Flush surface screw (5 mm × 6 mm) 14 PyÒÒÍËÈ Installation 2. And then secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. Determine the appropriate position where the holes on the bracket and the side of the unit match. [. . . ]