User manual PIONEER AVD-W9000

[. . . ] Please read through this manual before using the product for the first time, to ensure proper use. After reading, please keep the manual in a safe and accessible place for future reference. ­ Connecting the power cable 15 ­ Connecting with RCA cables 16 ­ Connecting with component cables 17 Installation 18 ­ Installing the hide-away unit 18 Additional Information Using the display correctly 19 ­ Handling the display 19 ­ Liquid crystal display (LCD) screen 19 ­ Keeping the display in good condition 19 ­ LED (light-emitting diode) backlight 19 Specifications 21 Precautions IMPORTANT SAFEGUARDS 3 To ensure safe driving 3 ­ When using a display connected to COMPONENT OUT (component output) or VCR OUT (VCR output) 4 To avoid battery exhaustion 4 Before You Start About this unit 5 Visit our website 5 In case of trouble 5 To protect the LCD screen 5 For viewing the LCD comfortably 5 ­ Changing the wide screen size 5 ­ Changing the picture adjustment 5 Installing and removing the display unit 5 ­ Installing the display unit 6 ­ Removing the display unit 7 Resetting the microprocessor 7 Operating this unit What's What 8 ­ Display unit 8 Basic Operations 9 ­ Power ON/OFF 9 ­ Selecting a source 9 ­ Adjusting the volume 9 ­ Changing the wide screen mode 9 Changing the picture adjustment 10 ­ Adjusting the dimmer 11 Setup 11 ­ Setting the component video 11 ­ Selecting the video format 12 ­ Setting the power control function 12 Connection and installation Parts supplied 13 Connections 14 Please read all of these instructions regarding your display and retain them for future reference. 2 Keep this manual handy as a reference for operating procedures and safety information. [. . . ] JUST (just) The picture is enlarged slightly at the center and the amount of enlargement increases horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity even on a wide screen. CINEMA (cinema) The picture is enlarged by the same proportion as FULL or ZOOM in the horizontal direction and by an intermediate proportion between FULL and ZOOM in the vertical direction; ideal for a cinema-sized picture (wide screen picture) where captions lie outside. ZOOM (zoom) A 4:3 picture is enlarged in the same proportion both vertically and horizontally; ideal for a cinema-sized picture (wide screen picture). NORMAL (normal) A 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are the same as that of the normal picture. When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different. Remember that using the wide mode feature of this system for commercial or public viewing purposes may constitute an infringement on the author's rights protected by the Copyright Law. You can adjust the BRIGHTNESS (brightness), CONTRAST (contrast), COLOR (color) and HUE (hue) for each source. CONTRAST are stored separately for light ambient (daytime) and dark ambient (nighttime) conditions. A sun or moon is displayed next to BRIGHTNESS and CONTRAST, respectively, as the ambient light sensor determines brightness or darkness. When VCR1 [COMPONENT] is selected as the source, you cannot adjust the HUE. Press WIDE/MENU repeatedly to switch between the following adjustment functions: BRIGHTNESS (brightness)--CONTRAST (contrast)--COLOR (color)--HUE (hue)-- COLOR TEMP (color temperature)-- A. cONTRAST (active contrast)--DIMMER (dimmer) 3 Press VOL DOWN or VOL UP to adjust the selected item. Each time VOL DOWN or VOL UP is pressed, the level of selected item is increased or decreased. CONTRAST ­ Automatically sets the most suitable contrast for the scene # You can select ON or OFF, when A. # If you do not operate the function within about 30 seconds, the screen automatically returns to the ordinary display. Each time VOL DOWN or VOL UP is pressed, the cursor moves towards the left or right. the farther the cursor moves to the right , the brighter the screen becomes. # If you do not operate the function within about 30 seconds, the screen automatically returns to the ordinary display. The adjustment of the DIMMER is stored separately for each ambient light condition; daytime, evening and nighttime. The brightness of the LCD screen will be adjusted to optimum level automatically in accordance with the ambient light based on the setting values. The icons indicating the current ambient brightness used for adjusting the BRIGHTNESS and CONTRAST may differ from the DIMMER slightly. Press WIDE/MENU repeatedly to switch between the following adjustment functions: BRIGHTNESS (brightness)--CONTRAST (contrast)--COLOR (color)--HUE (hue)-- COLOR TEMP (color temperature)-- A. [. . . ] Thoroughly wipe off the surface before affixing the hook and loop fasteners. If the hook fasteners adhere to the car mat directly, you may install this unit without using the loop fasteners. If liquid or foreign matter should get inside this unit, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Service Station. Do not use the unit in this condition because doing so may result in fire, electric shock, or other failure. [. . . ]