User manual PIONEER A-30-S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PIONEER A-30-S. We hope that this PIONEER A-30-S user guide will be useful to you.


PIONEER A-30-S : Download the complete user guide (20484 Ko)

You may also download the following manuals related to this product:

   PIONEER A-30-S (2425 ko)
   PIONEER A-30-S (5260 ko)
   PIONEER A-30-S (2420 ko)

Manual abstract: user guide PIONEER A-30-S

Detailed instructions for use are in the User's Guide.

[. . . ] Book 2 ページ 2012年2月16日 木曜日 午前8時58分 IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En WARNING Before plugging in for the first time, read the following section carefully. [. . . ] Merely connecting the CONTROL IN/OUT jacks alone will not allow proper system control. € When a control cord is connected to the A-30/A20’s CONTROL IN jack, the unit cannot be controlled by pointing the remote control at the A30/A-20 (the remote sensor is automatically disabled). To AC outlet Power cord 1 Plug the supplied power cord into the AC IN socket on the rear panel of the unit. Book 7 ページ 2012年2月16日 木曜日 午前8時58分 Controls and displays Chapter 3: 6 7 Remote sensor (Except A-10) PHONES jack 13 INPUT SELECTOR knob/indicators Turn the knob clockwise or counterclockwise so that the indicator lights for your desired input source. When the remote control’s MUTE button is pressed to mute the sound, the indicator for the input source selected with the INPUT SELECTOR knob flashes. 03 English Controls and displays Front panel 1 2 3 4 5 Receives the signals from the remote control (page 4). 8 DIRECT button/indicator A-30 On : The indicator lights: When this button is set to ON, sound signals are output directly, without being passed through the various adjustment circuits (BASS, TREBLE, BALANCE, LOUDNESS). This allows reproduction of the signals with greater fidelity, but it disables any settings made with the BASS, TREBLE, BALANCE or LOUDNESS controls. Off : The indicator goes off: The signal passes through the various frequency adjusting circuits. When the indicator is OFF, adjustments can be made with the BASS, TREBLE, BALANCE, and LOUDNESS controls. Français Deutsch 14 POWER AMP DIRECT button/indicator (A-30 only) Press this button when the A-30 is to be used as a power amplifier (page 10). 9 6 7 8 9 10 11 12 13 14 BASS tone control 1 /I STANDBY/ON 4 SPEAKERS B button/indicator Switches the amplifier between off and on. When power is turned on, the power indicator in the center of the button will light. € On the A-10 model, this switches the amplifier between standby and on. 2 STANDBY/APD indicator When power is set to standby, the indicator lights red. When the Auto Power Down (APD) function is on, the indicator lights green (page 11). Use this button to listen to the speaker system connected to SPEAKERS B terminals. When turned to the right, low-frequency tones are emphasized; when turned to the left, low-frequency tones are de-emphasized. € This button does not operate when the DIRECT button is in the on position. italiano 10 TREBLE tone control Use to adjust the high-frequency tone. When turned to the right, high-frequency tones are emphasized; when turned to the left, high-frequency tones are deemphasized. € This button does not operate when the DIRECT button is in the on position. [. . . ] - Confirm that the unit is installed correctly; if the unit is turned on again without being allowed to cool, the same symptoms may appear (page 4). €Are you using speakers with impedance values not supported by this unit?€Are any speaker cables loose from the SPEAKERS terminals and touching other wires or the surface of the rear panel?Disconnect the power cord and reconnect the speaker cables correctly (page 6). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER A-30-S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER A-30-S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.