User manual PHILIPS SCF112

[. . . ] Y Page 9 32 x 27mm Page 10 33 x 27mm Page 11 33 x 27mm Page 12 32 x 27mm Page 13 32 x 27mm Page 14 33 x 27mm Page 15 33 x 27mm Page 16 34 x 27mm US: INSTRUCTIONS INCLUDED FR : INSTRUCCIONES EN EL INTERIOR ES: MODE D’EMPLOI INCLUS 4213 354 15861 US: Valve for Comfort breast pumps Valve is intended to allow the milk to flow from the Comfort breast pump to the bottle container. [. . . ] €¢ Be careful when you remove the white valve and when you clean it. To remove the white valve, gently pull at the ribbed tab on the side of the valve. Clean all parts in hot water with some mild washing-up liquid and then rinse them thoroughly. You can also clean the parts in the dishwasher (on the top rack only). €¢ To clean the valve, rub it gently between your fingers in warm water with some washing-up liquid. Sanitize all parts in a Philips AVENT steam sanitizer or by boiling them for 5 minutes. Storage: • Do not expose the valve to extreme heat and do not place it in direct sunlight, as prolonged exposure may cause discolouration. €¢ Children should be supervised to ensure that they do not play with the accessories of the breast pump. [. . . ] THIS FILE HAS BEEN UPDATED WITH APPROVED CUTTER AND REPRO’D WITHOUT GOING TO PRINT AS AT 2/4/2013 Status: REPRO Leaflet 262 x 27mm Barcode EAN/UPC: – Barcode ACL (FR): – BWR: PZN (DE): Point 6 ref: Trap/overprint: 0 microns – printer to apply own BWR – ISO Coated V2 ECI FOGRA 39 Printer to apply own 2 MT EC Judy Danoe Judy Danoe 6th September 2012 2 April 2013 P6 Quality Check: Project Manager: 1st proof date: Modify date: Point 6 file name: 12912-BOTH_VALVE_USFRES_15861. [. . . ]