User manual PHILIPS CE138/10 QUICK STARTING GUIDE

[. . . ] When one of the following options is displayed, rotate to select a radio region that matches your location. 12 Troubleshooting Warning •• Never remove the casing of this product. If you encounter problems when using this product, check the following points before requesting service. When you contact Philips, make sure that the product is nearby and the model number and serial number are available. [. . . ] Press and hold Press / repeatedly until [CLK] is displayed with time digits blinking. press repeatedly to display available information about the current track. Press repeatedly to select a repeat mode: • [REP ONE]: repeat the current track, • [RPT FLD]: repeat all tracks in the current folder, or • [RPT ALL]: repeat all tracks in the storage device. Press repeatedly to select a play mode: • [SHU ALL]: play all tracks randomly, • [SHU FLD]: play tracks in the current folder randomly, or • [SHU OFF]: play all tracks in the storage device in sequence. 3m m 3 4 Charge your iPod/iPhone Once the iPod/iPhone is docked and recognized, the charging starts. €¢ [MP3--LINK]: Listen to the audio input through the MP3LINK socket. €¢ [USB]: When a USB storage device or compatible iPod/ iPhone is connected and recognized, you can select this source to play audio files that are stored on it. €¢ [SD/SDHC]: When an SD/SDHC card is inserted and recognized, you can select this source to play audio files that are stored on it. 8 Listen to an external player • • •• Make sure that all loose leads are insulated with electrical All registered and unregistered trademarks are property of their respective owners. 4 Slide the unit into the sleeve until you hear a “click”. You can use the system to amplify the audio input from an external player, for example, MP3 player. 1 Check the car’s wiring carefully and connect them to the the supplied ISO male connectors. Connect an MP3 link cable to • the MP3-LINK socket on the system, and • the audio output socket (usually the headphone socket) on the external player. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. 1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. €¢ Modification of the product could result in hazardous radiation of EMC or other unsafe operation. €¢ The device is designed for negative ground (earth) 12 V DC operation only. €¢ To ensure safe driving, adjust the volume to a safe and comfortable level. €¢ Use only the supplied mounting hardware for a safe and secure installation. €¢ To avoid short circuits, do not expose the device to rain or water. • The device shall not be exposed to dripping or splashing. [. . . ] Search for a radio station automatically Press or to search for the previous or next radio station with strong signals. €¢â€¢ During play, no audio signals are transferred through the headphone socket of your iPod/iPhone. R Search for a radio station manually 2 Press the left end of the front panel inwards until it is securely locked with a “click”. Repeatedly until the target frequency is d c b a External sockets or connectors As indicated above Rear left speaker Rear right speaker Antenna Store radio stations in memory Note Sockets on rear panel 1 2 3 4 For ISO male connectors REAR L REAR R ANTENNA Connect your iPod/iPhone •• You can store a maximum of six stations in each band. [. . . ]