User manual PHILIPS 67315-87-16

[. . . ] Please use this manual to become familiar with your Philips Universal Remote. After you are familiar with your remote the first thing you need to do is to install batteries and setup your remote for your particular product and brand. We have also highlighted the DVR (Tivo/ Replay) buttons in green for easy referencing on the remote keypad. in addition to DVD and DVR , we have included Satellite functionality by adding the Controls , MENU , GUIDE , PAGE UP/DOWN/LEFT/RIGHT , ENTER , QUIT/CLEAR , INFO , SELECT and OK buttons right on the keypad. [. . . ] If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. The Code Identification Feature allows you to identify the 4 digit library code stored under your device key. For example, if you want to find out what 4 digit code is stored under your TV device key, follow the six steps below: 1. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn. When the red indicator blinks off the number you pressed is the first digit for the code you are searching for. To find the second digit, repeat step 4, this time when the red indicator blinks off this is the second digit. Alternatively, you can enable the remote to turn off your TV after a period of 1 to 99 minutes as shown below. This feature is only available for the TV Mode and the remote must be in TV Mode to set a Sleep Timer. This feature works even if your TV does not have its own Sleep function. Press and release the SLEEP button (Note any previously set Sleep timer is cancelled at this point and the remote returns to normal operation). The red indicator blinks off to indicate button press acceptance and remains off after the second button press. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control. All other Modes will now punch-through to your chosen Mode for Volume/Mute control. All "Visual" and "Audio" programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. Setting any Mode to use its own Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/ Mute buttons will do nothing. Press and hold the CODE SEARCH button until the red indicator turns on, then release the button. Press and hold the MUTE button until the red indicator blinks off, then release the button. Press and release the VOLUME- (Down) button, the red indicator blinks then stays on. All "Visual" and "Audio" programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. The learning feature lets you "learn" functions from your original remote control. For example - you may want to use your remote to operate the RANDOM PLAY feature from your original CD remote control. [. . . ] Should you wish to remove or clear one or more "learned" commands, follow the steps below: 1. Press and hold the CODE SEARCH button until the red indicator turns on. Press and release the button for the mode you want to clear (TV, VCR, etc. Press and hold the CODE SEARCH button until the red indicator turns on. [. . . ]