User manual PANASONIC VL-FKD2EX

[. . . ] Because signals are sent through the main monitor, different types of devices can be connected to each repeater. (For example, sub monitors can be connected to one repeater and cameras can be connected to another. ) This is useful when you want to connect to different types of devices over shorter distances. N Using 2 repeaters connected together This extends the signal away from the main monitor by sending signals directly between repeaters. [. . . ] R Unplug the product from the power outlet if the product emits smoke, an abnormal smell or makes unusual noise, or if the product has been dropped or physically damaged. Confirm that smoke has stopped emitting and contact an authorised service centre. R Hold the main body (not the metal parts) of the AC adaptor when unplugging it. Unplugging the AC adaptor while holding its cord or the cord’s plugs may result in fire, electric shock, or injury. Preventing accidents R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. R Do not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction, resulting in an accident. R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. ) CAUTION Preventing fire and electric shock R Do not use the product in areas that are exposed to rain, moisture, steam, or oily smoke, or areas that have excessive dust. Failure to do so may cause condensation to form on the product causing malfunction. R Even when the repeater and sub monitor (or camera) are used within 100 m of each other, obstructions can cause weak signals, noise, interrupted transmissions, distorted images and slow image refresh rates. € If the sub monitor is being used in a different building, or a different part of the house, i. R Operating the product near electrical appliances may cause interference. Other important information R The AC adaptor is used as the main disconnect device. Ensure that the power outlet is installed near the product and is easily accessible. Information for Users on Collection and Disposal of Old Equipment and used Batteries A B C 5 These symbols (A, B, C) on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [. . . ] ) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. 8 Wall mounting Make sure that the wall is strong enough to support the weight of the repeater. 1 Place the reference for wall mounting on the wall to mark the 2 screw positions. [. . . ]