User manual PANASONIC TX-L47DT50Y

[. . . ] Model No. TX-L42DT50Y TX-L47DT50Y TX-L55DT50Y Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. English Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2011) of DVB-T / T2 (MPEG2 and MPEG4-AVC(H. 264)) digital terrestrial services, DVB-C (MPEG2 and MPEG4-AVC(H. 264)) digital cable services and DVB-S (MPEG2 and MPEG4-AVC(H. 264)) digital satellite services. [. . . ] Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. This may cause damages to the CI module and CI slot. CI slot Insert or remove completely CI module Rear of the TV Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB-S, DVB-C or DVB-T (p. 20) Display the menu and select [Setup] select Setup Using Common Interface access 3 Select [Common Interface] select Common Interface Access access 4 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 59 Shipping Condition Resets the TV to its original condition, i. e. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc. ). 46 - 49) 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [Shipping Condition] System Menu Shipping Condition Access select access Restore Settings [Shipping Condition] 1 Check the message and initialise Shipping Condition All tuning data will be erased Are you sure ?Are you sure ? 2 Follow the on-screen instructions 1 (Confirm) Reset to Factory Shipping Condition Completed. Do not turn off Shipping Condition 2 (Confirm) [Auto Setup] will automatically start. 15) 3 (Start [Shipping Condition]) 60 Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. To download (Press the EXIT button not to download) You can update new software automatically or update manually. 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [System Update] System Menu System Update Access select access Update TV's software system [System Update] Updating the TV Software To update automatically Select [Auto Update Search in Standby] System Update Auto Update Search in Standby Off System Update Search Now select access / store If System Update is performed, the software will be updated (it may change TV functions). If you do not want to do so, set [Auto Update Search in Standby] to [Off]. Every time you set, the TV automatically performs a search in Standby and downloads an update, if any software updates are available. The automatic updating is performed under the following conditions: Standby (TV turned off with the remote control) Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby Off System Update Search Now Access 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take for about 60 minutes. In this case, the schedule information (the date that the new version can be used) will appear. The update will not start when the TV is off. 61 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. 97) 1 2 Select the external input Select [PC] Input Selection AV1 AV2 PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB select access Corresponding signals (p. 105) If [H-freq. ] or [V-freq. ] is shown in red, the signals may not be supported. PC menu setting To make settings "How to Use Menu Functions" (p. 37) Menu Item Input Resolution Adjustments / Configurations (alternatives) Switches to a wide view: VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1, 024 × 768 pixels) / WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Adjusts horizontal position Clock Displaying PC Screen on TV H-pos PC Setup Other items For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 105). Setup Adjusts vertical position V-pos Clock Phase Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted [H & V] / [On Green] [H & V]: by the horizontal and vertical signals from your PC [On Green]: by the green signal from your PC (if available) Press the OK button to reset [PC Setup] to the default settings Sync Reset to Defaults (p. 38 - 45, 63) Note 62 Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode. 45) To use this function completely, set [Advance(isfccc)] to [On] in the Setup Menu. [. . . ] This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. [. . . ]