User manual PANASONIC SC-HC57DB

[. . . ] For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Included Installation Instructions ( 3, 8) The installation should never be done by any other than a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. You may need them when maintaining or moving this unit. ) Model number suffix "EB" denotes UK model. EB RQT9709-1B Caution for AC Mains Lead For your safety, please read the following text carefully. [. . . ] Press [3, 4] to select the following mode and press [OK]. [AirPlay]: Refer to the connected device to verify the selected setting. Memorising stations To listen to DAB/DAB+ broadcasts, the available stations need to be memorised in this unit. This unit will automatically start the "DAB AUTO SCAN" and memorise the stations that are available in your region if the memory is empty. Press [RADIO] repeatedly to select "DAB/DAB+". OFF 1-TRACK ([CD], [USB]: "1, , `" is displayed. ) Select to cancel repeat playback. The selected track is repeated, (Skip to the desired track ( 13)) "SCAN FAILED" is displayed when the auto scan is unsuccessful. Locate the position with the best reception ( 16, "To verify or improve the signal reception quality") and then re-scan DAB/DAB+ stations. ALL ([CD], [USB]: "`" is displayed. ) All tracks are repeated. To re-scan DAB/DAB+ stations When new stations are added or when the antenna has been moved, reperform the auto scan. 1 2 Press [PLAY MENU] repeatedly to select "AUTOSCAN" and then press [OK]. [CD]: Repeat play is cancelled when you open the sliding door for discs. [AirPlay]: The applied settings will remain until it is changed on the connected device. While "START ?" is flashing, Press [OK]. When updating the memory with the auto scan, preset stations will be erased. Preset them again ( 16). Listening to the memorised stations Preparation*1 1 2 3 Press [RADIO] to select "DAB/DAB+". Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. Press [:/6] or [5/9] to select the station. 1 2 *1: The "TUNEMODE" setting is memorised until it is changed. 15 RQT9709 Presetting DAB/DAB+ stations You can preset up to 20 DAB/DAB+ stations. Display Press [DISPLAY] to change the display. Each time you press the button: Dynamic label: PTY display: Ensemble label: Frequency display: Time display Information about the broadcast Programme type The name of the ensemble The frequency block and frequency is displayed. Preparation Press [RADIO] repeatedly to select "DAB/DAB+". 1 2 While listening to a DAB broadcast Press [OK]. Press [3, 4] to select the desired preset channel number and then press [OK]. You cannot preset stations when the station is not broadcasting or when the secondary service is selected. The station occupying a channel is erased if another station is preset in that channel. Automatic clock adjustment If the DAB broadcast includes time information, this unit's clock will be automatically updated. Listening to preset DAB/DAB+ stations Preparation*1 1 2 3 Press [RADIO] to select "DAB/DAB+". Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. Press [:/6] or [5/9] to select the station. 1 2 Press [PLAY MENU] repeatedly to select "AUTO CLOCK ADJ" and then press [OK]. Press [3, 4] to select "ON ADJUST" and then press [OK]. Select "OFF ADJUST" to turn the automatic clock adjustment function off. 1 2 To verify or improve the signal reception quality To check the signal reception quality, at least 1 frequency block needs to be successfully memorised. If "SCAN FAILED" is displayed after "DAB/DAB+" is selected or after an auto scan, proceed to "Manually tuning 1 frequency block" ( below) If stations have already been memorised to this unit, proceed to "Checking the DAB/DAB+ signal reception quality" ( 17) To select by preset, make sure that stations have already been preset manually. To add additional preset stations, select the station using the method mentioned in "Listening to the memorised stations" ( 15). Listening to the secondary service Some DAB/DAB+ stations provide a secondary service as well as the primary service. If the station you are listening to is providing secondary service, " " will be displayed. Manually tuning 1 frequency block Use this function to scan 1 frequency block after adjusting the position of the DAB antenna. Preparation Note down a frequency block that can be received in your region (e. g. , 12B 225. 648 MHz). 1 2 While " " is displayed. Press [PLAY MENU] repeatedly to select "DAB SECONDARY" and then press [OK]. Press [3, 4] to select the secondary service and press [OK]. 1 2 3 4 While "SCAN FAILED" is displayed. Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. Press [3, 4] to select "MANUAL" and then press [OK]. *1 Press [3, 4] to select the frequency block that is receivable in your region and then press [OK]. The setting will go back to primary service when changes are made (e. g. [. . . ] After this display has disappeared, start operating. "REMOTE " (" " stands for a number. ) The remote control and this unit are using different codes. ­ When "REMOTE 1" is displayed, press and hold [OK] and [4] for more than 4 seconds. ­ When "REMOTE 2" is displayed, press and hold [OK] and [3] for more than 4 seconds. "SCAN FAILED" Stations are not receivable. If "SCAN FAILED" is still displayed find the best signal reception with the "MANUAL" tuning function. [. . . ]