User manual PANASONIC SC-HC37DB

[. . . ] For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Included Installation Instructions ( 3, 8) The installation should never be done by any other than a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. You may need them when maintaining or moving this unit. ) Model number suffix "EB" denotes UK model. EB RQT9636-1B Caution for AC Mains Lead For your safety, please read the following text carefully. [. . . ] Press [RADIO] repeatedly to select "DAB/DAB+". 1 2 While listening to a DAB broadcast Press [OK]. Press [3, 4] to select the desired preset channel number and then press [OK]. "SCAN FAILED" is displayed when the auto scan is unsuccessful. Locate the position with the best reception ( 13, "To verify or improve the signal reception quality") and then re-scan DAB/DAB+ stations. You cannot preset stations when the station is not broadcasting or when the secondary service is selected. The station occupying a channel is erased if another station is preset in that channel. Listening to preset DAB/DAB+ stations Preparation*1 1 2 3 Press [RADIO] to select "DAB/DAB+". Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. Press [:/6] or [5/9] to select the station. To re-scan DAB/DAB+ stations When new stations are added or when the antenna has been moved, reperform the auto scan. 1 2 Press [PLAY MENU] repeatedly to select "AUTOSCAN" and then press [OK]. While "START ?" is flashing, Press [OK]. 1 2 When updating the memory with the auto scan, preset stations will be erased. Preset them again ( right). Listening to the memorised stations Preparation*1 1 2 3 Press [RADIO] to select "DAB/DAB+". Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. Press [:/6] or [5/9] to select the station. To select by preset, make sure that stations have already been preset manually. To add additional preset stations, select the station using the method mentioned in "Listening to the memorised stations" ( left). Listening to the secondary service Some DAB/DAB+ stations provide a secondary service as well as the primary service. If the station you are listening to is providing secondary service, " " will be displayed. 1 2 1 2 While " " is displayed. Press [PLAY MENU] repeatedly to select "DAB SECONDARY" and then press [OK]. Press [3, 4] to select the secondary service and press [OK]. The setting will go back to primary service when changes are made (e. g. the station is changed). 12 *1: The "TUNEMODE" setting is memorised until it is changed. RQT9636 Display Press [DISPLAY] to change the display. Each time you press the button: Dynamic label: PTY display: Ensemble label: Frequency display: Time display Information about the broadcast Programme type The name of the ensemble The frequency block and frequency is displayed. If broadcasting stations are memorised, proceed to "To re-scan DAB/DAB+ stations" to memorise stations on other frequency blocks. ( 12) If "SCAN FAILED" is still displayed, repeat steps 1 to 4 until a station is memorised. If the situation does not improve, try using an outdoor DAB antenna or consult your dealer. Checking the DAB/DAB+ signal reception quality 1 Automatic clock adjustment If the DAB broadcast includes time information, this unit's clock will be automatically updated. While listening to the DAB broadcast: Press [PLAY MENU] repeatedly to select "SIGNAL QUALITY" and then press [OK]. The current frequency block is displayed and then the reception quality is indicated. 1 2 Press [PLAY MENU] repeatedly to select "AUTO CLOCK ADJ" and then press [OK]. Press [3, 4] to select "ON ADJUST" and then press [OK]. 2 3 Select "OFF ADJUST" to turn the automatic clock adjustment function off. If the signal reception quality is poor, move the antenna to a position where the reception quality improves. To continue checking the quality of other frequency blocks Press [3, 4] again and select the desired frequency. To verify or improve the signal reception quality To check the signal reception quality, at least 1 frequency block needs to be successfully memorised. If "SCAN FAILED" is displayed after "DAB/DAB+" is selected or after an auto scan, proceed to "Manually tuning 1 frequency block" ( below) If stations have already been memorised to this unit, proceed to "Checking the DAB/DAB+ signal reception quality" ( right) 4 Press [OK] to exit. If the antenna has been adjusted, perform auto scanning and update the station memory. ( 12) Manually tuning 1 frequency block Use this function to scan 1 frequency block after adjusting the position of the DAB antenna. Changing the Auto scan frequency range Only the frequencies currently used in the UK as of February 2012 on BAND III are Auto scanned ("United Kingdom", factory setting). Select "ALL BAND III" when you want to store stations on other frequencies to memory. [. . . ] ( 12) "NO PLAY" A CD that is not in CD-DA or MP3 format is inserted. If there are more than 255 albums or folders (audio and non-audio), some of the MP3 files in these albums may not be read and played. Alternatively, reformat the USB device and save these music albums prior to saving the other non-audio folders. 17 RQT9636 "NO SERVICE" "NO SIGNAL" The station is currently not broadcasting. Check your antenna ( 10). Unit and media care Pull out the AC mains lead from the outlet before maintenance. You have inserted an iPod/iPhone that cannot be played ( 6). [. . . ]