User manual PANASONIC KX-T7775 DOORPHONE

[. . . ] Features: n mounts directly on to a wall or can be flush-mounted; n illuminated call button; n operates standard door-bell; n confirmation tone; n can make and receive calls; n the microphone's sensitivity is adjustable; n optional decorative fascias; n suitable for home and office use. Compatibility The Panasonic KX-T7775 Doorphone is compatible with the following Panasonic PBX systems: KX-TA1232, KX-TA624, KX-TA308, KX-TD816, KX-TD1232, KX-TDA50, KX-TDA100, KX-TDA200, KX-TAW848, KX-TA824, KX-TD500, KX-T30810, KX-T61610 and KX-T123211. The KX-T7775 Doorphone is not compatible with KX-TD308 and KX-T336 PBX systems. [. . . ] If in doubt when installing the Doorphone Module, consult your authorized dealer. n n System Connection BELL INPUT DOOR CHIME SYSTEM n DOORPHONE MODULE PBX AC ADAPTOR PBX DOORPHONE CARD (Refer to Figure 2) Max 500 m (1640 ft) 22 AWG POWER MODULE (Refer to Figure 3) CAUTION: n This product requires AC input to function. Ensure that the AC outlet is located near the PBX, and is easily accessible. The Power Module is designed for internal use only and should be located in close proximity to the main PBX. Wherever possible, it should share any power failure backup systems provided for the PBX. The connection between the Doorphone and the Power Module is not polarity sensitive. This Doorphone manual should be read in conjunction with the relevant PBX manual. Always complete installation before connecting the DC voltage to the Power Module. Low voltage building wiring methods shall meet the requirements of National Electric Code (NEC) NFPA 70, Article 725. 4 Figure 1 - System Connection n To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified person when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. This unit should be kept free of dust, moisture, high temperatures (more than 50°C (122°F)) and vibration. The socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: n When the power supply cord or plug is damaged or frayed. n If the product does not operate normally by following the operating instructions. [. . . ] Never spill liquid of any kind on the product. Max 500 m (1640 ft) 22 AWG Figure 2 - Doorphone Module's Interconnects PBX DOORPHONE CARD POWER MODULE Refer to pages 6 to 8 for pin details. 2 3 MODULAR 4 JACK 5 AC ADAPTOR Note: Polarity sensitive. DOOR 1 Max 500 m (1640 ft) 22 AWG Figure 3 - Power Module's Interconnects 12 5 POWER MODULE 1 MODULAR JACK MODULAR PLUG POWER MODULE 2 MODULAR JACK MODULAR PLUG KX-TD816/KX-TD1232/ KX-TA1232 (using KX-TD161 DP Interface) and KX-TA308/KX-TA624/ KX-T30810/KX-T61610/ KX-T123211 Adjusting the Sensitivity of the Microphone Where there is a lot of background noise, for example, due to traffic or machinery, it may be necessary to adjust the sensitivity of the microphone. To adjust the sensitivity of the microphone: Insert flat-headed screwdriver here. Locate the switch. REAR OF UNIT TAB UPWARDS 2345 NOT USED NOT USED TAB UPWARDS 2345 NOT USED NOT USED DOORPHONE MODULE n + PBX DOORPHONE CARD n PQJS1T30ZA-E MODULAR JACK 2 4 6 1 3 5 Turn the switch clockwise (-) if sited in a noisy location. [. . . ]