User manual PANASONIC HC-V10

[. . . ] Operating Instructions Digital Video Camera Model No. HC-V10 Before use, please read these instructions completely. Model number suffix "EB" denotes UK model. VQT4C38 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. of your Digital Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Concerning the battery Warning Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC or incinerate. CAUTION Danger of explosion if battery is incorrectly replaced. [. . . ] (The setting of [RESUME PLAY] does not change. ) Zooming in on a still picture during playback (Playback zoom) You can zoom in on still pictures during playback. 1 Move the zoom lever to side. You can zoom to a maximum of 4a. (k1 # k2 # k4) 2 Shift the position of the zoomed portion using the cursor button. Return The location of the zoom displays for about 1 second when zooming in (zooming out) or moving the displayed location. The more picture is enlarged, the more its quality deteriorates. A Displayed location of the zoom Zooming out from the zoomed still picture Move the zoom lever to side to zoom out. (k4 # k2 # k1) 54 VQT4C38 Advanced (Playback) Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 Select the date select icon using the cursor button, then press the ENTER button. A Date select icon 2 3 Select the playback date, then press the ENTER button. Select the scene or the still picture to be played back, then press the ENTER button. The scenes or the still pictures recorded on the date selected are displayed as thumbnails. Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode is changed. Even if the scenes have been recorded on the same day, they will be displayed separately in the following cases. j When the number of scenes exceeds 99 j When the number of recorded still pictures exceeds 999 Scenes recorded on the same day are displayed separately if the recording mode has been changed between recording them. The icon that appears behind the date on the list by date changes as follows. is displayed after the date in the list by date for the still pictures created from the motion picture. (l 53) VQT4C38 55 Changing the playback settings and playing back the slide show 1 2 Select using the cursor button, then press the ENTER button. (Only when you would like to change the settings) Select the desired item and press the ENTER button. Select the date to be played back. Select the music to be played on playback. [DATE SETUP]: [SLIDES INTERVAL]: [MUSIC SELECT]: 3 (When [DATE SETUP] is selected) Select the playback date, then press the ENTER button. (When [SLIDES INTERVAL] is selected) Select the desired item and press the ENTER button. [SHORT]: [NORMAL]: [LONG]: Approx. 15 seconds (When [MUSIC SELECT] is selected) Select the desired sound and press the ENTER button. 4 5 Select [START] and press the ENTER button. (l 28) When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or [EXIT] is displayed. To adjust the volume of music during playback of the slide show, operate the volume lever. (l 29) 56 VQT4C38 Advanced (Playback) Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete the scene or still picture being played back Press the button while scenes or still pictures to be deleted are being played back. To delete scenes or still pictures from the thumbnail display 1 2 Press the button while the thumbnail view screen is displayed. Select [ALL SCENES] or [SELECT] using the cursor button, then press the ENTER button. All the scenes or still pictures displayed as thumbnails will be deleted by selecting [ALL SCENES]. (In case of playing back scenes or still pictures by date, all the scenes or still pictures on the selected date will be deleted. ) Protected scenes/still pictures cannot be deleted. 3 (When [SELECT] is selected in Step 2) Select the scene/still picture to be deleted, then press the ENTER button. The scene/still picture is selected and the indication appears on the thumbnail. Up to 99 scenes can be selected to be deleted. 4 (When [SELECT] is selected in Step 2) Select [Delete], and press the ENTER button, or the button. To continuously delete other scenes/still pictures, repeat Steps 3-4. When you stop deleting halfway Press the MENU button while deleting. The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored. VQT4C38 57 To complete editing Press the MENU button. You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. You can also delete still pictures by pressing the MENU button, selecting [PHOTO SETUP] # [DELETE] # [ALL SCENES] or [SELECT]. Scenes which cannot be played back (the thumbnails are displayed as ) cannot be deleted. In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures. [. . . ] Microsoft®, Windows® and Windows Vista® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U. S. Intel®, Pentium®, Celeron® and Intel®CoreTM are trademarks of Intel Corporation in the U. S. [. . . ]