User manual PANASONIC CY-VMC7000U

[. . . ] Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 http://www. panasonic. com Panasonic Sales Company. 9. 5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 http://www. panasonic. com YEFM283699 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www. panasonic. ca B1200-0 Printed in Japan Imprimé au Japon Impreso en Japón ® In-dash 7 Wide Color LCD Monitor / CD Player Moniteur grand écran couleur 7 à écran à cristaux liquides - lecteur de CD intégré en tableau de bord Monitor LCD en color de pantalla ancha de 7" emportrado/Reproductor de CD CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / PLAYER 1 2 3 4 DISC/BAND 5 7 8 6 9 VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE A 0 CY-VMC7000U Operating Instructions Manuel d'instructions Manual de Instrucciones ¡Please read these instructions carefully before using this product and save this manual for future use. ¡Prière de lire ces instructions attentivement avant d'utiliser le produit et garder ce manuel pour l'utilisation ultérieure. [. . . ] w Press [ENTER] to set. Notes: ¡Press [MODE] to return to the regular mode. ¡The display returns to the previous one if there is no operation for more than 60 seconds after changing to the setting / adjusting menu. [}] [{] []] [[] (Select and Adjust) [ENTER] [MODE] 1 2 3 E N G L I S H 18 CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [}] [{] []] [[] (Select and Adjust) DISC/BAND 4 7 5 8 6 9 [MENU] A 0 VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE [ENTER] OFF VTR1 VTR2 : Unconnected : Connected to the VTR1-IN : Connected to the VTR2-IN Notes: ¡Make sure to select "OFF" when no rear view camera is connected. ¡In case using an optional rear view camera, the reverse lead must be connected. (a page 47) DISPLAY OFF ON Clock Display Clock Display : Clock display OFF : Clock display ON ([12:00] is displayed before adjusting the clock. ) ADJUST Clock Adjustment Adjust the time (12-hour system). []] hour advance [[] minute advance blinks once SEC RESET Clock Re-adjustment Reset the clock to zero seconds. The clock display blinks once and clock starts. CY-VMC7000U 27 E N G L I S H 19 User Settings 1 (continued) q Press [[] or []] to select "USER". w Press [ENTER] to set. Press [MENU] to display the main menu. 2 [MENU] CY-VMC7000U [MODE] DISC/BAND CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [}] [{] []] [[] (Select) DISC/BAND VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE [ENTER] ID Code setting Prior to operating this unit, it is advisable to assign your 4-digit ID code for security. ID code can not be set with two or three digits. ) Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked so that a thief could not use the stolen unit unless that person knows the code you have set. The ID code operation must be performed only by the person whom the unit belongs to. Generally, it is not necessary to enter the ID code each time when using the unit if it has never been disconnected from the main power supply (car battery). Caution: Record your registered ID code and keep it in a secure location. In case that you can not operate the unit because of forgetting the ID code, please consult your nearest Panasonic Servicenter. (a page 11) Select Select USER ID-CODE 28 CY-VMC7000U 3 Note: Press [MODE] to return to the regular mode. E N G L I S H 20 Enter an ID code by using the remote control. [}] [{] []] [[] (Select) [ENTER] [MODE] 1 2 3 4 CY-VMC7000U 5 7 8 6 9 [MENU] [ENTER] [0] to [9] (ID code input) A 0 IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE How to Set Your ID Code (For the First Time) q Enter an ID code of 4 digits using the buttons [0] to [9] on the remote control. Note: When you are setting your ID code for the first time, it is not necessary to enter the old ID code. w Enter the ID code of 4 digits again using the buttons [0] to [9] on the remote control. How to Change Your ID Code q Enter the preset (old) ID code of 4 digits using the buttons [0] to [9] on the remote control. w Enter a new ID code of 4 digits using the buttons [0] to [9] on the remote control. e Enter the new ID code of 4 digits again using the buttons [0] to [9] on the remote control. How to Cancel the Known ID Code Note: Should your unit ever require service, cancel your ID code before sending for repair. q Enter the preset (old) ID code of 4 digits using the buttons [0] to [9] on the remote control. [. . . ] The picture is light in color. Check / Remedy "AUTO" dimmer is selected. aSelect one of the dimmer levels from among 1 to 4 to make the dimmer adjustment become free from light intensity. aMake every adjustment of the screen. Red, blue, or green spots appears. This is a characteristic of liquid crystal panels and is not a problem. 50 CY-VMC7000U s Remote Control Symptom Check / Remedy Battery polarities (+) (­) are reversed. aDirect the remote control at remote control sensor on the display unit. E N G L I S H 42 Buttons are invalid for operation. Error Display Messages s CD Display Check / Remedy Disc is dirty, or is upside down. [. . . ]