User manual PANASONIC AG-HVX200

[. . . ] Memory Card Camera-Recorder Model No. AG- P Before operating this product, please read the instructions carefully and save this manual for future use. F1205S3046-H D Printed in Japan ENGLISH VQT0S52-3 Reference Menu Displays Editing Playback Shooting Preparation Description of parts Operating Instructions Before use CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: THE AC RECEPTACLE (MAINS SOCKET OUTLET) SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER CORD PLUG FROM THE AC RECEPTACLE. CAUTION: Danger of explosion or fire if battery is mistreated. [. . . ] When clips have been copied by operating Explorer, for instance, the "!" indicator may appear on the clips. If this happens, "!" can sometimes be released by downloading the latest version of the P2 viewer from the web site given below, installing it in your computer, and copying the clips again. https://eww. pavc. panasonic. co. jp/pro-av/ Playback 1 On the thumbnail screen, press the MENU button. (Page 64) 2 Select OPERATION using the button, and press the (or and ) button. 3 Select the desired item using the buttons, and press the button. and DELETE: Select this to delete the selected clip. Select YES to delete the clip or NO to cancel the deletion, and press the button. Select the P2 slot (SLOT1 or SLOT2) or select SD CARD, and press the button. Select YES to format the card or NO to cancel the formatting, and press the button. 69 Thumbnail operations (continued) Checking the clip or card information (PROPERTY) You can perform any of the following operations. Checking the SD memory card information Insert the SD memory card into the unit. Setting the P2 card memory capacity display Checking the version of this system P2 4 To exit the information screen, press the Clip information screen 1 2 3 MENU button, use the button to select EXIT, and then press the button. 1 On the thumbnail screen, press the MENU button. (Page 64) 2 Select PROPERTY using the button, and press the (or and ) button. 1 Clip number 2 Thumbnail 4 5 3 Slot number/dubbing mode display 3 Select the desired item using the buttons, and press the button. and CLIP PROPERTY: The information of the selected clip is displayed. (See details at right. ) CARD STATUS: The P2 card information is displayed. (Page 71) PROPERTY SETUP: Set the method of displaying the P2 card memory capacity. After selecting P2 CARD CAP, select REMAIN (remaining memory) or USED (memory used), and press the button. EXIT: Select this to return to the last screen. 4 Clip information Various indicators that have been added to the clip and also various kinds of data are displayed. ( appears if the P2 card is writeprotected) CLIP NAME: Clip name START TC: Time code value when recording started START UB: User information value when recording started DATE: Date when the recording was made TIME: Time when recording started DURATION: Clip length V_FORMAT: Video signal format FRAME RATE: Playback frame rate REC RATE: Recording frame rate This display appears when recording using a setting for the FRAME RATE item on the SCENE FILE screen other than the default during 720P/24P or 720P/30PN recording operations. 5 Clip metadata The video and audio formats, videographer information and other detailed data are displayed here. (For details on the clip metadata, see page 57. ) 70 P2 P2 card information screen SD memory card information screen 1 2 THUMBNAIL 3 SD OPERATIONSTANDARD : USED PROPERTY BLANK META DATA : SUPPORTED : 96 KB : 122. 3 MB : 122. 4 MB ! EXIT TOTAL NUMBER OF CLIPS PROTECT OK : : OFF 4 1 Write protection mark 2 P2 card status The amount of memory remaining on the P2 card is displayed using a percentage bar. The information on the card in the selected slot (indicated by the yellow number) can be viewed by pressing the SET button. BRAND: Name of manufacturer MODEL NO. : Model number SERIAL NO. : Serial number USER ID: User ID 3 P2 card remaining memory/total memory The P2 card's remaining memory and total memory are displayed here in 1-minute increments. Fractions of a minute are rounded off, meaning the display may not match the slot total. 4 Slot total The figure represents the total remaining memory of the cards in the two slots. [. . . ] 20 minutes for DVCPRO or DV) or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value. Same as GLOBAL CLIP ID (UMID data) Example of recording (DVCPRO50) a clip on one P2 card: REC start (recording start) REC/PAUSE (recording pause) TYPE2 USER CLIP NAME to be recorded If clip metadata has been read in If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Uploaded data + COUNT value* Recording duration = Approx. Clip 2 COUNT value = 0002 5 min. Same as CLIP NAME Example of recording a clip on two P2 cards: REC start (recording start) Clip 1 COUNT value = 0003 1st card REC/PAUSE (recording pause) Clip 2 COUNT value = 0004 2nd card The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. [. . . ]