User manual PANASONIC AG-MX70

[. . . ] Digital AV Mixer AG- P Before attempting to connect, operate or adjust this product, please read these instructions completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] During sliding, the DSK buttons have no effect but become operational again upon completion of the sliding operation. This setting can also be changed at the PC. 47 DSK/Fade settings [Fade] settings These are used to perform the fade settings. The image to be faded is selected from [Black], [White] or [Blue] using the rotary 2 control. [On] or [Off] is selected for [Audio] fading using the rotary 3 control. [After] or [Pre] is selected for [Phone] fading using the rotary 4 control. At [After], the sound is heard with the fading effect applied to the images; at [Pre], it is heard with no fading effect applied to the images. The default setting is [After]. R1 R2 R3 R4 R5 Fade To Black Black White Blue Audio On On Off Phone After After Pre <Note> Only one of three settings--namely, DSK memory, title key or star/heart key--can be selected. The key selected last takes precedence, and the previously selected key is canceled. When the pattern is changed to MIX (56), the title key or heart/star key is to be canceled. During title DSK, the heart/star key cannot be used. 48 [Audio Effects] settings Pos. X 128 Y 128 Z 196 00E 1-8 Aux1 Aux2 Event 10:00F 3015 Pan Off IN Ch L Low On EQ Mid Voice Change M Level 0 Off Ch Off AB R4 R2 R3 ME Time Pattern Wht Balance 0 High 0 0 0. 5 5 INT Audio Effects 1 EQ Freq Q 1. 01KHz Pitch Up Level Mute R1 R5 [Audio Effects] is opened using Audio Effects or the ON button. Select the input from [1] (crosspoint 1), [2] (crosspoint 2), [3] (crosspoint 3), [4] (crosspoint 4), [5] (crosspoint 5), [6] (crosspoint 6), [7] (crosspoint 7), [8] (crosspoint 8), [AUX1] or [AUX2] using the rotary 1 control. Select the item from [PAN], [EQ] (equalizer), [EQ Mid] equalizer midrange, [Voice] (voice changer) or [Mute] using the rotary 2 control. [PAN] setting Set [On] or [Off] using the rotary 3 control. The default setting is 0. R1 R2 R3 R4 R5 PAN 1 On Off Off IN Ch L L R L+R Balance 0 L7 - 0 - R7 49 [Audio Effects] settings [EQ] equalizer setting This is used to set the equalizers. The [L Level] bass level can be set in 2 dB intervals to any value from ­14 dB to 0 to +14 dB using the rotary 5 control. The [H Level] treble level can be set in 2 dB intervals to any value from ­14 dB to 0 to +14 dB using the rotary 4 control. The default setting is [0]. R1 R2 R3 R4 R5 EQ 1 On Off On L Level 0 ­14 - +14 H Level 0 ­14 - +14 [EQ Mid] equalizer midrange setting The [M Level] midrange level can be set in 2 dB intervals to any value from ­14 dB to 0 to +14 dB using the rotary 3 control. The midrange frequency can be set to any value from 100 Hz to 10. 2 kHz using the rotary 4 control. The default setting is [0. 5]. R1 R2 R3 R4 R5 EQ 1 MId M Level 0 ­14 - +14 Freq Q 1. 01KHz 100 Hz 10. 2 KHz 0. 5 1 2 5 0. 5 [Voice Change] (voice changer) setting This is used to set the voice changer. [Level] can be set to any value from [0] to [10] using the rotary 5 control. The default setting is [5]. R1 R2 R3 R4 R5 1 Voice Change On Off Pitch Off Up Down Up Level 5 0 - 10 [Mute] setting Set the mute level using the rotary 3 control. [AB] (AB bus only), [ABAUX1] (AB bus and Aux1) or [All] can be selected. [. . . ] The button display of In a Windows 98 environment with certain video cards, the button display may become main window is abnormal. Even if this problem should occur, operation of this software will not be influenced. It may be possible to eliminate the problem using one of the following methods. Click "Advanced" on the "Settings" page of "My Computer" > "Control Panel" > "Display, " open the "Performance" page on the displayed Properties screen, and set the hardware accelerator setting to "Basic" or "None. " 96 Specifications [GENERAL] Power Source : 120 V AC, 50/60 Hz Power Consumption : 52 W (with no optional accessories installed), 70 W (with all optional accessories installed) indicates safety information. [. . . ]