User manual ORION TELESCOPES & BINOCULARS FINDERSCOPEBRACKET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ORION TELESCOPES & BINOCULARS FINDERSCOPEBRACKET. We hope that this ORION TELESCOPES & BINOCULARS FINDERSCOPEBRACKET user guide will be useful to you.
Manual abstract: user guide ORION TELESCOPES & BINOCULARS FINDERSCOPEBRACKET
Detailed instructions for use are in the User's Guide.
[. . . ] Addendum to the Instructions: Improved Finder Scope Bracket
#9960, 9980, 9990 SkyQuest XT Dobsonian #9403, 9408 SkyView Deluxe EQ
During recent production of our SkyQuest XT Dobsonian and SkyView Deluxe telescopes, we developed an improved design for the finder scope bracket. [. . . ] Please refer to the following instructions, rather than those included in your Product Manual, for installation and use of this new bracket. To place the finder scope in the finder scope bracket, first unthread the two black nylon alignment screws until the screw ends are flush with the inside diameter of the bracket. Place the included rubber O-ring over the body of the finder scope until it seats into the groove on the middle of the finder scope. Slide the eyepiece end (narrow end) of the finder scope into the end of the bracket's cylinder that does not have the alignment screws while pulling the spring-loaded tensioner on the bracket with your fingers. Push the finder scope through the bracket until the O-ring seats just inside the front opening of the bracket's cylinder. Now, release the tensioner and tighten the alignment screws a couple of turns each to secure the finder scope in place. [. . . ] Refer to Figure 1 to identify the parts of the new finder scope bracket.
Eyepiece end of finder scope Alignment screws
Eyepiece end of finder scope Alignment screws
O-ring (not pictured) Spring-loaded tensioner Dovetail base
O-ring (not pictured) Spring-loaded tensioner Dovetail base
Figure 1a: 6x30 Model
Figure 1b: 8x50 Model
Customer Support (800) 676-1343 E-mail: support@telescope. com
Corporate Offices (831) 763-7000
Providing Exceptional Consumer Optical Products Since 1975
P. O. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ORION TELESCOPES & BINOCULARS FINDERSCOPEBRACKET
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ORION TELESCOPES & BINOCULARS FINDERSCOPEBRACKET will begin.