User manual OREGON BAR908HGU

[. . . ] Metal Weather Station Model: BAR908HG / BAR908HGU / BAR908HGA User Manual CONTENTS Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE The transmission range may vary and is subject to the receiving range of the main unit. You may need to experiment with various locations to get the best results. SWITCH Channel OPTION If you are using more than one sensor, select a different channel for each sensor. EU (DCF) / UK (MSF) (RTGN318D only) SENSOR DATA TRANSMISSION Data is sent from the sensor(s) every 60 Seconds. The reception icon shown in the Temperature / Humidity Area indicates the status. (The number shows which sensor is selected. ) --- shows in Temperature / Humidity Area The selected sensor cannot be found. For best results: · · · · Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor. Do not place the sensor more than 70 metres (230 feet) from the main (indoor) unit. Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and · · SEARCH FOR SENSOR 10 To search for a Thermo / Hygro sensor, press SELECT to will show navigate to the Temperature / Humidity Area. next to the Area. NOTE If the sensor is still not found, check the Once complete, the reception icon will stop blinking. The 2 factors: · · icon shown in the Clock Area indicates batteries. CLOCK AND CALENDAR This product tracks the time and date based on radiocontrolled signals from the RTGN318 / RTGN318D / RTGN318A remote sensor, or manual settings that you enter. Connection between the main unit and the sensor that collects RF signals ( ) RF signal reception ( ) How these signals work together: ICON MEANING The unit has contact with the sensor and has synchronized the time. The unit has contact with the sensor but the time has not been synchronized. The unit has lost contact with the remote sensor but the time is synchronized. The unit has lost contact with the remote sensor and the time is not synchronized. The unit cannot reach the remote sensor. RADIO-CONTROLLED CLOCK The time and date are automatically updated by radiocontrolled clock signals from official time-keeping organizations. The signals are collected by the remote sensor RTGN318 / RTGN318D / RTGN318A. · BAR908HG (RTGN318): DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. · BAR908HGU (RTGN318D): Slide EU / UK to select the signal received. · BAR908HGA (RTGN318A): WWVB-60 signal: within 3200 km (2000 miles) of Fort Collins, Colorado. Initial reception takes 2-10 minutes, and is initiated when you first set up the unit, and whenever you press RESET. 11 EN EN TURN RADIO-CONTROLLED CLOCK ON / OFF If you wish to manually set the clock, you must first disable the radio-controlled feature. [. . . ] When disposing of this product, ensure it is collected To display the Heat Index: 1. · · 17 EN EN separately for special treatment and not as normal household waste. · Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information. [. . . ]