User manual ONE FOR ALL 1280

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ONE FOR ALL 1280. We hope that this ONE FOR ALL 1280 user guide will be useful to you.


ONE FOR ALL 1280 : Download the complete user guide (1689 Ko)

Manual abstract: user guide ONE FOR ALL 1280

Detailed instructions for use are in the User's Guide.

[. . . ] Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). If your device switches off, the ONE FOR ALL REMOTE is ready to operate your device. [. . . ] learning (copy) Your One For All remote control can learn any function from any other working remote control. To do this, firstly make sure you have all your original remote controls to hand, and that they have working batteries in. To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing towards it as shown below: Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). Press and release the key you want to learn a function onto (for example Press and release the corresponding key on the original remote, for example Power. The red LED will blink twice to indicate the key has been learned correctly. Repeat steps 4 and 5 for each key you want to learn ­ remember you can Learn from multiple remotes, but only one function per key. When you learned all the functions you require, press and hold the SETUP Key until the red LED blinks twice. If the red LED shows one long blink at step 6, the function was not learned correctly, please try again from step 4. If you find one or more keys don't work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1. Press and hold down the SETUP key until the red LED underneath The POWER key blinks twice (the red LED will blink once then twice). This feature gives you the possibility to set the Volume (VOL+, VOL- and Mute) to always control a certain device (e. Tv) independent of which device mode key (SAT, DVD, VCR, DVB-T, AMP, HI-FI or MP3) is selected. [. . . ] Sökmetoden gör det möjligt för dig att hitta koden till din apparat genom att söka igenom alla koder som finns i minnet till din ONE FOR ALL. För att göra detta ska du först se till att du har alla originalfjärrkontollerna nära till hands och att de har batterier i. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ONE FOR ALL 1280




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ONE FOR ALL 1280 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.