User manual OLYMPUS CAMEDIA C-3000 ZOOM

[. . . ] MOVIE PICTURE DISPLAY MENU * Press the Menu button to set the following items when the Mode dial is set to and a movie picture is displayed on the LCD monitor. 152) « MOVIE PLAY FUNCTION CARD SETUP MODE SETUP « INFO Displaying information about the image (date and time, file name, etc. ). 34)] « « « 151 PLAYING MOVIES You can play movies you have recorded. will appear on the LCD A/S/M OF OW ER/M OD E D IAL 245 1 F 1 P Set the Mode dial to . [. . . ] The modes that can be selected are shown in the table on the following page. Press the right arrow on the Jog dial, then press the top/ bottom arrows to select the desired value. Press the OK button to exit from the Custom settings screen and return to the MODE SETUP screen. Confirm that CUSTOM is selected, then press the OK button to cancel MODE SETUP. Even if the current settings are different from the custom settings, the custom settings will be saved in memory. 9 10 11 12 197 CUSTOM SETTINGS (Cont. ) Items which can be set to the desired state in CUSTOM. Flash Spot/Macro Zoom position Aperture value Shutter speed Exposure compensation MF Monitor (P) Drive Flash exposure compensation Slow shutter synchronizing flash Flash select Digital zoom White balance ISO Function photography Sound record Still photo quality mode Manual mode Movie image mode Screen information display Auto/Red-Eye Reducing/Fill-In/Off Off/Spot/Macro/Spot + macro 32mm/50mm/70mm/96mm F2. 8 ~ F11 1/800 ~ 16 1/3 EV increments up to ±2 EV. AF/MF Off/On Single photo/Continuous photo/AF continuous photo/ Selftimer/Remote control/Auto bracket 1/3 EV increments up to ±2 EV Off/Before shutter/After shutter Main + extension/Extension Off/On Auto/Daylight/Overcast/Tungsten light/Fluorescent Auto/100/200/400 Off/Black and white/Sepia/White board/Black board Off/On TIFF/SHQ/HQ/SQ1/SQ2 A/S/M HQ/SQ Off/On 198 SHARPNESS You can select the image sharpness. 1 3567 /M OD E A/S /M P OF F PO ER 48 2 CARD SETUP MODE SETUP A/S/M MODE P F2. 8 1/800 +2. 0 SETUP [3/3] (Still picture record menu) ALL RESET TIFF SQ1 SQ2 HARD NORMAL SOFT [1/3] Note: · The setting will remain until it is readjusted. IA D L 1 2 3 W Set the Mode dial to P, A/S/M or . Press the top/bottom arrows on the Jog dial to select MODE SETUP, then press the right arrow to select SETUP. Press the right arrow on the Jog dial, then press the top/bottom arrows to select NORMAL, SOFT or HARD. Press again to cancel the Menu. 4 5 6 7 8 199 TIFF SETTINGS This sets the resolution for the TIFF mode. /M OD E A/S /M 356 OF PO ER 1 P F 4 2 CARD SETUP MODE SETUP A/S/M MODE P F2. 8 1/800 +2. 0 SETUP [3/3] ALL RESET TIFF SQ1 SQ2 SETUP [1/3] 200 IA D L 1 2 3 W Set the Mode dial to P or A/S/M. Press the top/bottom arrows on the Jog dial to select MODE SETUP, then press the right arrow to select SETUP. Press the right arrow on the Jog dial to select SETUP and press OK button. 4 5 6 7 P F OF P OW ER /M OD E A/S /M 7 Use the top/bottom arrows on the Jog dial to select the resolution. · 2048 x 1536, 1600 x 1200, 1280 x 960, 1024 x 768 or 640 x 480 are available. · The compression rate for all resolutions is uncompressed TIFF. Press again to cancel the Menu. 89 TIFF 2048X1536 1600X1200 1280X 960 1024X 768 640X 480 Note: · The setting will remain until it is readjusted. · The greater the number of pixels, the longer the playback time, and the smaller the number of frames that can be photographed, so exercise caution. 42/43) IA D L 8 9 201 SQ1, SQ2 SETTINGS You can select the resolution and compression rate for SQ1 and SQ2. NORMAL quality allows more pictures to be stored in a card, while HIGH quality uses less compression, resulting in fewer visible artifacts in the JPEG image. OF 357 PO ER 1 P F W /M OD E A/S /M 1 2 3 46 2 CARD SETUP MODE SETUP A/S/M MODE P F2. 8 1/800 +2. 0 SETUP [3/3] ALL RESET TIFF SQ1 SQ2 SETUP [1/3] 202 IA D L Set the Mode dial to P or A/S/M. Press the top/bottom arrows on the Jog dial to select MODE SETUP, then press the right arrow to select SETUP. Press the top/bottom arrows on the Jog dial to select SQ1 or SQ2, then press right arrow on the Jog dial to select SETUP. · The resolutions that can be selected are shown in the following table. 4 5 6 7 P F OF P OW ER /M OD E 8 A/S /M 8 Press the right arrow on the Jog dial, then press the top/ bottom arrows to select HIGH or NORMAL. Press again to cancel the Menu. 9 10 SQ1 1600X1200 1280X 960 HIGH NORMAL Recording mode Image quality HIGH (High quality) 1600 x 1200 NORMAL SQ1 HIGH (High quality) 1280 x 960 NORMAL HIGH (High quality) 1024 x 768 NORMAL SQ2 HIGH (High quality) 640 x 480 NORMAL JPEG Recording size File format Note: · The setting will remain until it is readjusted. · The greater the number of pixels, the longer the playback time, and the smaller the number of frames that can be photographed, so exercise caution. [. . . ] CARD ERROR Cannot record, play back or erase pictures in this card. If you are taking pictures, remove the write-protect adhesive seal. If the card is dirty, wipe it with a clean tissue and insert it again. If that cannot be done, the image file is partially damaged. (No display) PICTURE ERROR The recorded image cannot be played back with this camera. 227 ERROR CODES (Cont. ) Control panel LCD monitor (Format confirmation screen) Error content The card is not formatted. Remedy Format the card. NO PICTURE There are no picutures in the card, so there is nothing to play back. [. . . ]