User manual NOKIA RC 9575

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NOKIA RC 9575. We hope that this NOKIA RC 9575 user guide will be useful to you.


NOKIA RC 9575 : Download the complete user guide (12368 Ko)

Manual abstract: user guide NOKIA RC 9575

Detailed instructions for use are in the User's Guide.

[. . . ] The battery supplied with the UPS contains small amounts of toxic materials. To avoid accidents, the directives listed below must be observed: - Never burn the battery (risk of explosion). - Do not attempt to open the battery (the electrolyte is dangerous for the eyes and skin). - Comply with all applicable regulations for the disposal of the battery. [. . . ] In case of doubt, don't hesitate to contact our after sales department (for more information, refer to the web site www. mgeups. com). Special precautions 3400723100/AD - Page 3 Foreword Using this document Information may be found in two ways, using: the contents; the index. Pictograms IMPORTANT: Important instructions that must always be followed. NOTE: Information, advice, help. WARNING: Indicates present eminent danger, precautionary action required. CAUTION: Indicates to proceed with caution, precautionary action required. Visual indication. Action. Audio indication. In the illustrations on the following pages, the symbols below are used: LED off. LED on. LED flashing. Page 4 - 3400723100/AD Contents 1. Presentation 1. 1 Overall view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tower position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rack position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. 2 1. 3 Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. Installation 2. 1 2. 2 2. 3 2. 4 2. 5 2. 6 2. 7 Unpacking and parts check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Upright installation (tower position) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Flat installation (rack position) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connecting the protected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connection to the RS232 or USB communications port (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connection to the data-line protection port (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Installation of the communications-card option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. Operation 3. 1 3. 2 3. 3 Start-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Shift to booster or fader mode (during voltage variations in the AC-input power) . . . . . . . . . . . . . . . . . . . . 16 Operation on battery power (following failure of AC-input power) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Transfer to battery power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Threshold for the low-battery warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3. 4 Personalization (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ON / OFF conditions tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Battery tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Voltage-thresholds tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Sensitivity tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4. Maintenance 4. 1 4. 2 Trouble-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Replacement of the battery module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5. Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3400723100/AD - Page 5 Contents 6. Appendices 6. 1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Simplified diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Technical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Examples of battery backup times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 6. 2 6. 3 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Page 6 - 3400723100/AD 1. Presentation 1. 1 Overall view Tower position Dimensions in inches (W x H x D) Evolution 2200 Evolution 3000 Evolution 3000 XL 17. 24 (19") x 3. 56 (2U) x 25. 2 Weight in lbs Evolution 2200 Evolution 3000 Evolution 3000 XL 75 82 46 SAR P U Lut io n Ev ol 0 300 Rack position D H SAR P U L tion E v o l u0 300 W 3400723100/AD - Page 7 1. Presentation 1. 2 Back Pulsar Evolution 2200 1 1 Data line protection R USB communications port. Two programmable receptacles (1 and 2). IN Programmable 1 AC Input 34Z5 U. P. S. RS232 2 3 5-20P OUT SITE WIRING FAULT 2 3 battery cabinets max TO BATTERY CABINET 72Vdc, 7Ah 344-50282-00 Pb BATTERY CONNECTOR Volt: 72Vdc 40A U. S. 6, 094, 363 AC Output Volt 120V~1O Hertz 50/60 Hz W/VA 1540W/1920VA Programmable WARNING AC Input Volt 120V~1O Amps 16A MAX Hertz 50/60 Hz 2 AC Output 1 2 3 5 4 6 8 9 10 4 5 6 Pulsar Evolution 3000 / 3000 XL 7 A 1 Data line protection R Programmable A IN OUT AC OUTPUT BRANCH PROTECTOR (15Amp max/plug) RS232 B 1 2 AC Output 34Z5 U. P. S. 8 AC Input B SITE WIRING FAULT WARNING 3 battery cabinets max for 3000 12 battery cabinets max for 3000XL 72Vdc, 9Ah Only for 3000 Pb TO BATTERY CABINET 344-50297-00 BATTERY CONNECTOR Volt: 72Vdc 40A U. S. 6, 094, 363 AC Output Volt 120V~1O Hertz 50/60 Hz W/VA 2000W/2800VA for 3000 2000W/2568VA for 3000 XL Programmable AC Input Volt 120V~1O Amps 24A MAX Hertz 50/60 Hz 1/2 2 L5-30 5-3 0P 9 10 1 2 3 5 4 6 7 8 9 10 Input power cords for connection to AC-power source; 2200/5-20P and 3000/L5-30. 11 Battery module connectors (to the UPS or to other battery modules). EXB additional battery module 11 3 11 13 12 Connectors for automatic detection of additional battery modules. When the battery reaches the end of its backup time, the UPS shuts down and all the LEDs go OFF. % 16 1 2 % The equipment is no longer supplied with power. The UPS automatically restarts when power returns. NOTE: If the UPS does not restart, check that the "automatic restart when power returns" function has not been disabled (see section 3. 4 Personalization). 3400723100/AD - Page 17 3. Operation 3. 4 Personalization (optional) Function Personalization parameters can be set and modified using the UPS Driver software installed on a computer that is connected to the UPS (see section 2. 5 Connection to the RS232 or USB communications port). UPS Driver installation: 1 - Insert the Solution-Pac CD-ROM containing the UPS Driver software in the drive of a PC running Windows. 2 - Open the Windows File manager or Explorer and select the CD-ROM drive. Once UPS Driver has been installed, UPS parameters can be modified in a window containing a number of tabs, each presenting a set of parameters : ON / OFF conditions tab Configurable function Automatic restart Cold start Forced reboot Energy saving UPS ON / OFF via software Default setting Enabled Enabled Enabled Disabled Enabled Options Disabled Disabled Disabled Enabled Disabled Battery tab Configurable function Interval between automatic battery tests Low-battery warning threshold Configuration of additional battery modules Default setting Once a week Options Every day Once a month No test 20% of the remaining battery back- 10 to 40% of the remaining battery backup time up time Display the number of standard EXB modules connected to the UPS Enabled Back-up time for non-standard batteries (for 3000XL only) Disabled Protection against deep discharges Page 18 - 3400723100/AD 3. Operation Voltage-thresholds tab Configurable function Output voltage on battery power Upper threshold for transfer to battery power Fader-mode cut-in threshold Booster-mode cut-in threshold Lower threshold for transfer to battery power Maximum input-voltage range Default setting 120 V 151 V 132 V 102 V 89 V Disabled Options 100 V - 127 V 141 V to 153 V 127 V to 138 V 92 V to 108 V 80 V to 94 V Enabled (1) Lower threshold for transfer to battery mode = 70 V Sensitivity tab Configurable function UPS sensitivity level Default setting Normal Options High or low NOTE: For more information about these settings, refer to the Help function of the "UPS Driver" software. 3400723100/AD - Page 19 4. Maintenance 4. 1 Trouble-shooting Troubleshooting not requiring NOKIA UPS SYSTEMS after-sales support (all versions) Indication LED 18 flashes and the buzzer beeps once. Correction Check the power drawn by the equipment and disconnect any non-priority devices. Replace the battery module (see section 4. 2). Troubleshooting requiring NOKIA UPS SYSTEMS after-sales support Indication LED 17 goes ON and the buzzer sounds continuously. Correction Page 20 - 3400723100/AD A 3400723100/AD - Page 21 E 4SA B 3 E P 8a - 2f 0 t e y0 0 E 4. [. . . ] Device on the front panel indicating the percent remaining backup time or the percent load. Additional battery modules connected in parallel to increase the UPS backup time. Automatic UPS operating mode whereby the input-power voltage is increased if it drops below a value set in the personalization parameters, thus avoiding a battery discharge. Automatic UPS operating mode whereby the input-power voltage is decreased if it rises above a value set in the personalization parameters, thus avoiding a battery discharge. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NOKIA RC 9575




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NOKIA RC 9575 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.