User manual NEXTBASE IN CAR CAM 202 LITE

[. . . ] Instruction Manual TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 CAUTIONS ON USING THIS PRODUCT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 PRODUCT SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select the required setting and press OK to confirm, press MENU once more to exit the Video Menu. The default settings within the iN-CAR CAM have been set to allow you to use the iN-CAR CAM without the need to change any settings, however it is recommended that you explore these settings to familiarise yourself with the product and it’s capabilities. 11 PHOTO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Photo mode, some icons will only be displayed once the relevant function has been selected within the Photo menu, as described further down this page. 1 2 3 4 2 5 2 12 11 +0 AWB )) 01234 5M 6 7 8 10 ISO AUTO 9 1. Capture Mode Icon: Displayed on screen when Capture Mode (timer) is selected from within the Photo menu. Anti-Shaking Icon: Displayed on screen when the Anti-Shaking enhancement has been enabled from within the Photo menu. Sequence Icon: Displayed on screen when the Sequence function has been selected from within the Photo menu, the iN-CAR CAM will automatically take five pictures when OK is pressed. Image Count: Displays number of images that can be stored on the memory card based on current image quality settings. Resolution: Displays the current resolution as set within the Photo menu. Quality: Displays the current image quality as set within the Photo menu. Memory Card Icon: Icon will be marked with a red cross when there is no memory card inserted. Battery Indicator: Displays battery level, it is recommended to keep the car adaptor plugged in during use, the indicator will flash during charging. ISO Icon: Displays the current ISO setting as selected within the Photo menu. White Balance Icon: Displays the current White Balance setting as selected within the Photo menu. Exposure Icon: Displays current exposure setting as selected from within the Photo menu. The Photo menu is accessed by using the MENU button located on the rear of the iN-CAR CAM, use the UP and DOWN buttons to navigate through the Menu and press the OK button to enter the options screen. Select the required setting and press OK to confirm, press MENU once more to exit the Photo Menu. The default settings within the iN-CAR CAM have been set to allow you to use the iN-CAR CAM without the need to change any settings, however it is recommended that you explore these settings to familiarise yourself with the product and it’s capabilities. Note: - Within the SETUP menu which is accessed from within any mode by pressing the MENU button twice, there is a ‘Default Setting’ option to allow you to reset the iN-CAR CAM to the factory defaults if required. 12 PLAYBACK MODE The iN-CAR CAM can display Videos and Photos stored upon the SD card when in Playback Mode. The displays for video and photo playback differ slightly, please refer to the relevant section Video Playback When a video is detected upon the SD Card, the screen below is shown. The key below explains the various information displayed on the screen, during video playback and how to use the control buttons. 2 1 3 4 720P 6 5 01/01/2013 23:59:59 OK: /II MODE: UP: DOWN: 1. Video Playback Icon: Indicates the iN-CAR CAM is displaying a video in the Playback mode. Protected File Icon: Displayed when a video file has been protected by activation of the internal G Sensor during recording or by selecting ‘Protect’ from within the playback menu. Resolution: Displays the resolution that current video was recorded in. [. . . ] Remove useful files using your PC and then perform a “FORMAT” upon the SD card from within the SETUP menu. Use a full sized SD card where possible, not a MicroSD card and adaptor. The SD card has become full as the Loop recording function is set to OFF. Set the “Loop Recording” function to 3mins (default) to enable the cycle recording function and automatic deletion of older files. [. . . ]