User manual NAIM DAC BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NAIM DAC. We hope that this NAIM DAC user guide will be useful to you.


NAIM DAC BROCHURE: Download the complete user guide (1009 Ko)

You may also download the following manuals related to this product:

   NAIM DAC BROCHURE (1010 ko)
   NAIM DAC BROCHURE (1022 ko)
   NAIM DAC BROCHURE (1009 ko)
   NAIM DAC REFERENCE MANUAL (963 ko)
   NAIM DAC REFERENCE MANUAL (963 ko)
   NAIM DAC REFERENCE MANUAL (963 ko)
   NAIM DAC REFERENCE MANUAL ISSUE 3A (851 ko)
   NAIM DAC REFERENCE MANUAL ISSUE 3A (851 ko)
   NAIM DAC REFERENCE MANUAL ISSUE 3A (851 ko)
   NAIM DAC REFERENCE MANUAL (963 ko)
   NAIM DAC REFERENCE MANUAL ISSUE 3A (851 ko)

Manual abstract: user guide NAIM DACBROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] Simultaneously with its introduction, the CDX2 and CD5 XS CD players have gained S/PDIF outputs and can now benefit significantly from use with the DAC. With the addition of a DAC, existing preamplifiers can be incorporated into digital audio systems. [. . . ] Original solutions to these problems had to be conceived and developed. The Naim DAC has more in common with Naim CD players than with conventional external digital to analogue converters. It overcomes the jitter issues of S/PDIF by reading the data into a "rotating" data RAM buffer independently of its timing signal and reading it out again clocked by one of ten extremely low noise, fixed frequency crystal sine-wave oscillators. In terms of system topology, the DAC's rotating memory is analogous to a rotating CD feeding raw data to be reclocked. The rate at which the memory fills and empties is controlled by the DAC automatically selecting the oscillator that matches the average incoming clock frequency. The data entering the downstream digital filtering and DAC chips is then completely isolated from the incoming S/PDIF jitter. Along with being a source of jitter, S/PDIF is a potential source of RF noise. The Naim DAC suppresses S/PDIF noise through electrical isolation of its DSP front end from the digital to analogue converter and analogue circuits. Each element is also run from separate power supplies The Naim DAC's digital filtering is handled by a powerful SHARC DSP chip running unique Naim authored code to create an ultra high precision 40bit floating point filter. The filter over-samples by 16 times on 44. 1kHz data and provides stop-band attenuation of 180dB on all data. Following the digital filter are the two mono Burr-Brown digital to analogue converter chips, as used in the CD555 CD player. Finally the Naim DAC features a very high performance, low noise, and low distortion fully discrete analogue output stage. [. . . ] the appropriate crystal oscillator. APPLE AUTHENTiCATiON CHiP Enables the DAC to access digital data from iPod and iPhone models. The Naim DAC is the world's first Apple-Authenticated highend digital to analogue converter. CRYSTAL SiNE-WAVE OSCiLLATORS Crystal oscillators have lower signal correlated noise and phase noise than voltage controlled clocks. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NAIM DAC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NAIM DAC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.