User manual MINOX DC 6011

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Finish the sequence by pressing the SET button after the last image has been recorded. 1 2 SET: Return 01/06/2005 20:50 00034 The digital zoom function and menu access are not available at this mode. EN-40 [ ] Video Mode This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Pressing the shutter button one more time will end the recording of the video clip. The recording time depends on the storage size and the subject of the image to be recorded. Zoom function cannot be used during video recording. When recording a video clip, the flash cannot be used. If the access speed of your SD memory card is not enough for recoding video clips in the currently selected quality, a warning icon [ ] will appear, and then the movie recording will stop. In this case, select a video quality lower than the current one. EN-41 [ ] PLAYBACK MODE Playing Back Still Images You can play back the still images on an LCD monitor. The images can be fed in reverse or fed forward with the To view the previous image, press . To view the next image, press . / buttons. Image Display Information You can switch the state of the information display by pressing the button when playing back images. Each press of the button switches the information display state in the following order: Pressing the / buttons during image playback will result in a 90 degree rotated display. The button rotates the image clockwise and displays it, whereas the button rotates the image counterclockwise and displays it. A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. EN-42 Playing Back Video Clips You can play back video clips recorded on the LCD monitor. A press of the / buttons during playback allows fast forward play / fast reverse play. Button Operations During Playback During a Pause (Forward play) Pressing the button will sequentially 1-frame feed invoke 2x fast-forward, 4x fast-forward, regular play. (Reverse play) Pressing the button will sequentially Reverse 1-frame invoke 2x fast-reverse, 4x fast- feed reverse, regular play. Pause Cancel pause Regular forward play During a Stop The next image is displayed. button button The previous image is displayed. button button SET button Video clips cannot be displayed rotated or enlarged. EN-43 Playing Back Still Images/Video Clips on the Docking Station You can also playback your images or video clips on the docking station. It is recommended to use the AC power adapter when playing back images or video clips on the docking station. The camera has no function at [ ] or [ ] mode when using with the docking station. The method of operation is the same as playing back still images and video clips on the camera. PHOTO USB Attaching Voice Memos A maximum of 30 seconds of audio can be recorded like a memo for photographed still images. Select the image that you want to attach the voice memo with the / buttons. To stop recording voice memo during recording, press the shutter button again. A [ ] icon is displayed with images that have been recorded with a voice memo. Playing back voice memo A press of the SET button displays [VOICE PLAYBACK] and plays back the voice memo. [. . . ] Format the memory card in this camera before its first use or when it was used other than this camera. Get closer to your subject and shoot. Images do not appear on LCD monitor is dark. Even though the flash fired, The distance to the subject is greater the image is dark. The image is captured in a dark place Set the flash to something other than while set to flash off. [. . . ]