User manual MIELE SCOUT RX1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE SCOUT RX1. We hope that this MIELE SCOUT RX1 user guide will be useful to you.
Manual abstract: user guide MIELE SCOUT RX1
Detailed instructions for use are in the User's Guide.
[. . . ] 45 Finish vacuuming: if vacuuming started from somewhere in the room . 59
33
en - Warning and Safety instructions
This robot vacuum cleaner complies with current safety requireâ ments. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the robot vacuum cleaner, please read these instructions carefully before using it for the first time. [. . . ] You can switch the robot vacuum cleaner into standby before 60 secâ onds is up by pressing the Power butâ ton again. The robot vacuum cleaner is reactivaâ ted by pressing any button on the reâ mote control or one of the two sensors in the robot vacuum cleaner display. Selecting the vacuuming mode
î Press the Power button on the remoâ te control. Option 1 (Remote control)
î Press the button for the vacuuming mode you want. Spot
46
en
î To start vacuuming, press the ï î butâ ton on the remote control or the ï î sensor in the display. Option 2 (Display) The Timer î and the hour indicators will flash in the display. Î Press the ï¾ sensor repeatedly until the symbol for the vacuuming mode you want lights up. Î Press the + or - direction button to set the hour you want. Î To start vacuuming, press the ï î butâ ton on the remote control or the ï î sensor in the display. Setting the timer (only possible if the clock has been set) If you would like the robot vacuum cleaner to start at the same time every day, you can save the start time and vacuuming mode you want to memory. Howevâ er, please be aware that vacuuming may be less thorough. The camera needs light to enable it to navigate withâ out restriction. Î Press the + or - direction button to set the minutes you want. The Timer î and the minutes indicaâ tors will flash in the display. Î On the remote control, press the butâ ton for the vacuuming mode you want or the direction buttons until the symbol for the vacuuming mode you want flashes. The robot vacuum cleaner will now start to vacuum at the same time each day. The Timer indicator î lights up to show that the timer has been activaâ ted. Deactivating the timer î Press the OK button on the remote control for at least three seconds. Reducing the maximum crossing over height The robot vacuum cleaner is set as standard so that it can negotiate a height of up to 20 mm. 6 mm) in order to proâ tect chair or table legs, or lamps for exâ ample, you can deactivate the factory default setting. Activating the timer / displaying a set start time
î Press the Timer button on the remote control briefly. The Timer indicator î lights up, the set start time is shown briefly and the robot vacuum cleaner will start vacuuming at the set start time. [. . . ] Problem F1 Cause and remedy "Wheel raised" î Place the robot vacuum cleaner on a level floor surface. This fault message will also apâ pear if the side brushes are not fitted. "Dust box" î Replace the dust box in the robot vacuum cleaner, making sure it clicks into position. "Drive wheels overloaded" î Check whether the drive wheels have become dirâ ty. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE SCOUT RX1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE SCOUT RX1 will begin.