User manual MCINTOSH UR12

[. . . ] Owners Manual UR12 Touch Screen Remote UR12 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 WARNING - TO REDUCE RISK OF DAMAGE, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. NO USER-SERVICEABLE PARTS INSIDE. Do not permit objects or liquids of any kind to be, spilled and/or fall onto the equipment. Servicing is required when the equipment has been damaged in any way, liquid has been spilled or objects have fallen onto the equipment, the equipment has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Once you complete programming all the devices, exit from the programming mode by pressing both the button will only show the first brand (in alphabetical order) in that alphabet group. If the first code number assigned to the brand is the right one, it will turn off the component. If it is not the right one or if it is not the right brand name, press the Channel Up button. It will automatically send out a POWER OFF command either from the next code number from the same brand or the code from the next brand. When the component turns off, save the code by pressing the SAVE button on the Touch-button. Note: It is quite possible that the code number that works with your component may have a different brand name because of the way it was made by its manufacturer. Confirm that it is the right code number for your component by pressing other buttons such as POWER, VOLUME, MUTE and CHANNEL, etc. If any of the buttons do not operate as they should, please repeat from Step 5. MAIN button to exit to the main menu. Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. 2. LEARNING with the joystick and then push the joystick down to enter the learning mode. Refer to figure 13. Note: Any of the Touch-buttons may be used except the MAIN and PAGE Push-buttons. 10. Once you have completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously. TO EXIT and press the cursor down or simply press the 20 Figure 13 3. If you wish to teach any of the functional buttons in the device, keep the cursor at COMMON BUTTON and select the device that you wish to enter. If you wish to teach the twelve device buttons shown on the Touch-button, press the MUTE button to move the cursor to the DEVICE BUTTON System Settings and select the device on the Touchbutton that you wish to teach into. Place your original remote control to the UR12 head to head about 2-3 inches apart. Press either the Device Touch-button or functional button, whichever you wish to teach in the UR12. Press the button on your original remote control that you wish to teach into the UR12. The UR12 will beep indicating that it received the signal and the Touch-button will show RETRY. Press the same button on the original remote control a second time to ensure correct learning. The UR12 will beep a second time with GOOD flashed on the Touch Screen, indicating that it learned the code correctly. Move on to the next button (or device) you wish to teach by repeating from Step 5. If you are teaching functional buttons, you can also move on to teach the buttons in the next page by pressing the PAGE button. [. . . ] Please also note, that if your Product ever does require Warranty service, obtaining such service will be much easier if you have completed and returned the enclosed Warranty Registration Card. So please take a minute to fill out and return the Registration Card now, before you become too distracted by the great sounds coming from your new McIntosh Product! elcome to the family of McIntosh owners. This is the Warranty for your new McIntosh Home Electronic Product (the Product). Your Product has been designed to give many years of trouble-free performance. [. . . ]