User manual MAGIMIX 11706 NESPRESSO VERTUO NEXT

[. . . ] 16 10:48 EN FR Nespresso Vertuo is an exclusive system creating a perfect coffee, from the Espresso to the large Mug, time after time. Nespresso Vertuo machines are equipped with the unique Centrifusion® technology to gently extract a Mug, Gran Lungo or Espresso at the touch of a button. Each extracting parameter has been carefully defined by Nespresso coffee experts to ensure that all aromas from each Grand Cru can be extracted to give the coffee body and create an exceptionally rich and generous crema. COM - VOIR LA PAGE DES MACHINES These instructions are part of the appliance. [. . . ] 1 2 1 Rinse and clean the water tank and lid before filling it with only fresh drinking water. 1 2 2 Ensure the capsule container and the cup support are in place. For your safety, operate the machine only with cup support and capsule container in position. 16 10:48 EN FR 5 Steady GREEN lights will indicate the machine is ready. 8 Push the button 3 times in 2 seconds to start cleaning and let the cleaning procedure complete automatically. The procedure consists of 3 cycles of pumping water in, internal cleaning and water flowing from the outlet to complete. To restart the cleaning process, follow the instructions starting at point 8. To brew a coffee, insert a capsule, push the lever down to close the machine and push the button. 16 10:48 EN FR COFFEE PREPARATION / PRÉPARATION DU CAFÉ CAUTION: Be careful not to injure yourself on sharp points or trap your fingers when reaching inside the machine. remplir le réservoir avec de l’eau potable fraîche. la lumière VERTE et fixe indique que la machine est prête. The machine head will open automatically, with an electrical mechanism. NOTE: NOTE: NOTE: The factory settings and recommended cup sizes are: Mug: 230ml Gran Lungo: 150ml Espresso: 40ml NOTE: Les paramètres d'usine et format de tasse recommandés sont: Mug: 230ml Gran Lungo: 150ml Espresso: 40ml 16 9465_UM_ARES_D_MAGIMIX. Ensure previous capsule has been ejected before inserting a fresh one. Green light will rotate slowly during the barcode reading and pre-wetting phase. The machine will automatically recognize the inserted capsule and select the coffee preparation parameters and cup length defined by Nespresso coffee experts to extract the coffee blend at its best. NOTE: NOTE: 10 During the coffee preparation phase coffee will start to flow. The procedure consists of 3 cycles of pumping water in, internal cleaning and water flowing from the outlet to complete. Indd 20 5 The procedure can be stopped at any time by pushing the button. To restart the cleaning process, follow the instructions starting at point 4. To brew a coffee, insert a capsule, push the lever down to close the machine and push the button. 16 10:48 RESET TO FACTORY SETTINGS / RÉINITIALISER LES PARAMÈTRES DE RÉGLAGE D’USINE NOTE: Choose special function by pressing the lever down: 1 time for "Descaling". [. . . ] Remove any obstacle, empty the capsule container if necessary, and then open or close the machine head depending on position. Check that a fresh capsule is inserted in correct position, that the machine head is closed and push the button to start. Press the lever up and wait until the machine head stops, release any obstacle if applicable, empty the capsule container if necessary, and then press the lever down to close the machine head. Turn the machine OFF, unplug the power cord, wait for 15 minutes for the machine to cool down. [. . . ]