User manual LUX RO300 100V

[. . . ] 822 90 16-XX 16-33 Your new water purifier EN THANK YOU for entrusting us to supply your new water purifier. We are confident it will provide you with many years of trouble-free use. To avoid problems, it is important for you to read the user instructions. Read the «Safety information» and the «Installation» instructions especially carefully. [. . . ] The only difference is that the filter light first comes on and then go out. 1 2 3 4 5 6 7 8 9 10 -8- Maintenance Descaling When the flow is reduced, the water purifier should be descaled to extend its lifetime. When the flow cannot be restored despite descaling and filter replacement, contact your dealer. During the descaling procedure, which takes around 10 hours, the water purifier cannot be used. The descaling product can be ordered from your dealer, see «Consumables». Press the service button, using a pen, until the service light comes on. Unscrew the filter container in accordance with «Replacing the filter», points 2 - 5. Replace the filter in accordance with «Replacing the filter», points 7 - 8, except that the previously used filter is used here. A B 3. 4. 5. The water purifier is ready to be used. -9- Maintenance Disinfection If the feed water has a high content of micro-organisms, the water might develop an odour if the water purifier is not used for an extended period of time (1 week). Press the service button, using a pen, until the service light comes on. Disconnect the filter container in accordance with «Replacing the filter», points 2 - 5. Fill the container with 7 dl of lukewarm water and pour in 1/4 dl of disinfectant. Disconnect the container and insert a new filter into it, in accordance with «Replacing the filter», points 7 - 8. The water purifier is ready to be used. - 10 - Maintenance Storage The water purifier should be put into storage if: q E it is going to be disconnected from water and electricity for an extended period (1 week or more). it is not going to be used to produce purified water for a period of 4 months or longer. q Preserving agents can be ordered from your dealer, see «Consumables». Unscrew the filter container in accordance with «Replacing the filter», points 2 - 5. Put the filter container back in accordance with «Replacing the filter», points 8 - 9. Insert the feed water hose in the mixture, making sure that the mouth of the hose is constantly below the surface level of the liquid, see fig. Stop the production of pure water once all the liquid has been fed into the water purifier. The noise produced by the water purifier changes during the first few seconds. Disconnect the feed water and pure water hose from the water purifier. 5. The water purifier is put into storage and can be kept in this way without the risk of freezing. On reinstallation, the water purifier should: q stand somewhere where the temperature is above +5° C for at least 48 hours. be supplied with a new filter, see «Replacing the filter». [. . . ] Screw the feed water hose's straight end onto the shut-off valve as shown in fig. If the 3/4" hose connection does not fit, it can be changed to a 1/2" connection using the adapter supplied. Put the black washer in the adapter and screw the adapter onto the shut-off valve for feedwater. Screw the feed water hose onto the adapter. D 2. E Reject water outlet connection: The flushing water passes via the reject water hose to the reject water outlet. [. . . ]