User manual LENCO M-7001

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LENCO M-7001. We hope that this LENCO M-7001 user guide will be useful to you.


LENCO M-7001 : Download the complete user guide (100 Ko)

You may also download the following manuals related to this product:

   LENCO M-7001 (102 ko)
   LENCO M-7001 (104 ko)
   LENCO M-7001 (99 ko)
   LENCO M-7001 (103 ko)
   LENCO M-7001 BROCHURE (312 ko)
   LENCO M-7001 BROCHURE (312 ko)

Manual abstract: user guide LENCO M-7001

Detailed instructions for use are in the User's Guide.

[. . . ] M-7001 OWNER'S MANUAL 7" MONITOR INSTALLATION The unit includes the screen display (Fig. You can mount the unit according to the following steps. (5) (1) (3) (4) (6) (2) Fig. [. . . ] Press the switch under the headrest of the car seat and pull out the headrest. Assemble the Screen Mounting Bracket (2) to Screen Mounting Bracket (1) and Rotate combined bracket, then place them on the poles of the removed headrest to select proper hold position to install the base. Remove the Bracket from headrest and loosen the two screws by using the screwdriver, then place the two plastic tubes (3) on the holes that you just selected, then adjust them to proper position as shown in diagram below. Install the base on the poles of the headrest and adjust to proper position, then use four screws (ø3x10 (4) to fix the base 1 and base 2. (4) Screw (2) (1) 5. Install the headrest with the base and rotate the Mounting Bracket to the car seat in proper position, then use the screwdriver to fasten the two screws to fix the base. GB-6 INSTALL THE SCREEN ON THE BRACKET Insert the position plate on the screen unit into the clip screw plate and screw on the clip screw to fix the screen unit to the Mounting Bracket. Position plate (5) Position Clip-screw Rotate Bracket (6) Clip screw ADJUST THE ANGLE OF THE DISPLAY 1. Loose the clip screw on the side of the rotate bracket, then adjust the Mounting Bracket to the angle of the display to your need and screw on the clip screw to fix the Mounting Bracket. Clip screw 2. In order to adjust swing arm, you must first loosen as indicated by diagram with appropriate screwdriver. Adjusted by force will damage the Screen Mounting Bracket. GB-7 ELECTRICAL CONNECTION (1) (2) (3) YELLOW PVC CABLE (BLACK) (4) WHITE (5) RED (7) RED (6) BLACK (8) BLACK CAUTION: 1. Put the 9-pin mini din plug (1) into the 9-pin mini din socket (2) on the back of the display. The white socket (4) is connected to the AUDIO Out-Left socket and the red socket (5) is connected to the AUDIO Out-Right socket. When you want to use the unit, please cut the (7) and (8) two wires from the DC plug (6). Then connect the red wire (7) to the positive (+) terminal of the power supply and the black wire (8) to the negative (­) of the power supply. GB-8 CONTROL & FUNCTION KEYS 9 11 10 11 10 13 12 1 2 4 3 5 6 7 8 7 inch COLOR TFT LCD MONITOR GB-9 1. [. . . ] 9-PIN MINI DIN SOCKET The socket is used for AUDIO IN, VIDEO IN and power supply input. Through the socket (13), you can connect audio/video system to the unit. GB-10 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LENCO M-7001




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LENCO M-7001 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.