User manual LENCO IR-2100

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LENCO IR-2100. We hope that this LENCO IR-2100 user guide will be useful to you.


LENCO IR-2100 : Download the complete user guide (3343 Ko)

You may also download the following manuals related to this product:

   LENCO IR-2100 (2328 ko)
   LENCO IR-2100 (2253 ko)
   LENCO IR-2100 (2255 ko)
   LENCO IR-2100 (3790 ko)
   LENCO IR-2100 BROCHURE (150 ko)
   LENCO IR-2100 MANUEL 2 (3790 ko)
   LENCO IR-2100 MANUEL 2 (3790 ko)
   LENCO IR-2100 MANUEL 2 (3790 ko)
   LENCO IR-2100 MANUEL 2 (3790 ko)

Manual abstract: user guide LENCO IR-2100

Detailed instructions for use are in the User's Guide.

[. . . ] User Manual IR-2100 Internet / FM Radio Please read this user manual carefully before using the receiver Location of Controls 1. Tune Up 1 SETTING UP Please follow those steps for connecting your radio to your network Step 1- Switching on the radio; Plug the cable from the AC Cord into the socket on the back of the radio, then switch on at the mains. Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous. The display on the front of the radio will light up and say: Reciva Enabled ARM Powered Followed by: Initializing Network If you listen to the Internet radio and Media player before you turned off the radio, it will be automatically switched to Internet radio mode; Or if you was listening to FM radio, it will be automatically switched to FM radio mode. After a few seconds, this will change to show: Connecting to Network Step 2- Connect to network connection: Note: If you make a mistake at any point, press the BACK button to go back to the previous screen. [. . . ] Allowing the Radio to Connect: Note: When you were playing, you were able to change the mode of playback via selecting Media Player/Playback Mode. 15 Configure Menu Choosing the option you want from the Configure Menu 1. ( Note: If you make a mistake at any point , press BACK button to go back to the previous screen. ) 2. <Network Config> Enables you to configure your radio's network settings, scan again for a connection to another wireless network , or to manually configure the network parameters. This is useful if you take the Internet radio to another building where you want to use. Once the radio has established a certain type of connection to the network, then this type of connection will remain in use while the radio is on. <Version> Displays the versions numbers of the various parts of software the hardware on you Internet radio. <Firmware Upgrade> Use this option to download new firmware for the radio from the Reciva portal on the internet. If there is new firmware available, the radio will prompt you if you want to download it or not. Note, at this stage, you can press the radio's BACK button to cancel the radio beginning a firmware upgrade. A firmware upgrade may take several minutes, so do no switch off the power to the radio until the operation is complete otherwise the radio may become permanently damaged. <Factory Reset> Puts all the setting back to their default as they were when they left the factory. If you perform a factory reset on your radio you will loss all you presets and your wireless network connection. <Register> This will display a key that can be used to register the radio on the Reciva Customer portal. <Clock> Use this option to set the time, to set an alarm and to view the current alarm setting, see'' Setting the clock'', `'Setting the alarm''. <Sleep Timer> Selecting this option will enable the Internet radio to switch itself off after a set period. After selecting the `Sleep Timer' menu item, the radio will display: ` Sleep Timeout' and the sleep timer value in the form '00:00:00'(hours : minutes : seconds). Press Tune Up or Down to change to sleep timer value and then press SELECT to begin the sleep timer. The radio will continue to play as normal, but it will go into standby mode after the sleep timer has expired. <Backlight> Selecting this option will alter the internet radio's backlight values. 16 1. After select the `Backlight' menu item, the radio will display its list of three menu modes: `Inactive', `Active' and `Standby'. The radio gets into its `inactive' state when there is no user activity for 30 seconds. Press Tune Up or Down to highlight the desired menu mode and press SELECT. [. . . ] This will dramatically increase the speed at which the Internet Radio is able to scan the content of the Media PC. Playlists: Some media ripping applications allow `Playlists' to be created. The Internet Radio is able to detect and stream these playlists, but they must be stored in the folder with the rest of the Media content and they must have the file extension. m3u. Windows Media player can create suitable playlist, just select `create new playlist', drag and drop the tracks you want into the playlist, then use `Save as' to ensure the file type is . m3u. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LENCO IR-2100




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LENCO IR-2100 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.