User manual LENCO DVD-41 MPEG4 BROCHURE

[. . . ] Do notremove the cabinet cover Do not use acracked, deformed or repaired disc. Unplug this product from the outlet Do not attempt to service this product yourself IMPORTANT-SAFETY INSTRUCTIONS caution: Please read And observe All warnings And instructions given in this owners Manual and those marked on the unit. This set has been designed And Manufactured to assure personal safety. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. [. . . ] Direct the remote control at the remote sensor of the DVD video player. AA-A) Make sure to match the +and on the batteries to the marks inside the battery Compartment. 6. If the remote control does not function correctly or the operating range becomes reduced, replace all batteries with new ones. If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries. Close the cover Operation of the remote control This is for instructions how to use the remote control. 30 30 Note on the batteries Improper use of the batteries may cause battery leakage and corrosion. T o operate the remote control correctly, follow the instructions below. DVD-41 MPEG4 4 10 11 DVD/VCD/CD/MP3 PLAYER DVD-41 MPEG4 OPEN/CLOSE PLAY/PAUSE MP3 VCD DVD CD PCB REV PROG DOLBY D I G I TA L KARA KE PLAYBACK DECODER POWER ON OFF LRNP REMOTE SENSOR PREV STOP 1 MIC VOL NEXT 2 1 MIC 2 1 2 3 5 6 789 12 13 OSD POWER N/P REPEAT L/R SLOW RETURN + KEY TIME LANGUAGE SUBTITLE SETUP - ECHO + DIRECTIONAL BUTTON MENU PLAY PAUSE NUMERIC BUTTON PBC OPEN/CLOSE A-B RAN RESUME STEP 3D + VOL PDVD PROG ANGLE TITLE ENTER ZOOM MUTE STOP PREV NEXT REV 1. POWER 2. CD door 3. OPEN/CLOSE 4. PLAY/PAUSE 5. STOP 6. LED OSD 7. REMOTE SENSOR 8. MIC VOL 1 9. MIC VOL 2 10. PREV 11. NEXT 12. MIC 1 13. MIC 2 2 SCART OUT DVD PLAYER PRODUCT:DVD PLAYER MODEL:DVD-41 MPEG4 POWER SOURCE:AC 90-240V/50-60Hz POWER CONSUMPTION:20W SR. NO. : 15 10+ FWD CLEAR SCART output jack 15 1 2 This chapter lists the functions or operations of keys on the remote control. You can refer to the Previous Chapters or the detailed operations Of most keys. A-B During the playback, press this button at the point ( A ) where the repetition will start. Press this button again at the point ( B ) where the repetition Will end. PLAY During the state of stop, pause, slow motion, fast forward or fast reverse etc. , Press this button to return to the normal playback. TITLE Press this button, the selection menu of the DVD disc will appear. At this moment , use / button // to move the selection mark to the desired menu. When the main menu displayed, the DVD system will auto pause. SYSTEM SETUP TV SYSTEM According to the Color System of the TV, you can choose the TV System. AUTO: Choose this settings if your DVD player is connected to a multi-system TV. NTSC: Choose this settings if your DVD player is connected to a NTSC TV. l l PAL: Choose this settings if your DVD player is connected to a PAL TV. l PAL60: Choose this settings if your DVD player is connected to a PAL60 TV. l u b) Press the Left and Right arrow buttons to highlight the icon of the desired page, then press the Down or Right arrow button to activate that page; For example, if you want to setup the video page, press Right to highlight the video icon, the video page will be displayed on the screen. c) Press the Down arrow button to highlight the desired option. Press Enter or press Right to select, the choices of that option appear on the right; For example, press the Down arrow button to highlight the BRIGHTNESS option, then press Enter to select, the brightness choices appear on the right. SCREEN SAVER If the screen saver is on, when your DVD player is in Stop, Open, or No Disc state, or there is a frame frozen for more than 60sec, the screen saver will be displayed. l OFF: Choose this setting to cancel the screen saver The default setting is ON. d) l Press the Arrow buttons to highlight the Exit Setup option, then press Enter or Setup again to exit Setup Menu. Notes: When setup, the pressing of the following buttons will turn off the setup menu, while the choices that have been changed will be saved: P / N, Subtitle, F. F, F. R, Vol +/-, PBC, Title, Return, Play, Stop, Resume, Pause / Step, Next, Prev, S. F, S. R, Zoom, Preview, Goto, Program, Repeat, A-B, Angle, language, Soundtrack, 3D, Record, Display, Mute, Setup. 2. Setup Items Introduction a) SYSTEM SETUP The system setup options are illustrated below: VIDEO Interlace-YUV: Choose this setting if your DVD player is connected to a TV with Y, Cb, Cr video cables. l TV-RGB: Choose this setting if your DVD player is connected to a TV with an S-Video cable or composite video cables. [. . . ] If the disc you are playing has that language available, it will output audio in that language; There are 8 optional audio languages: Chinese, English, Japan, French, Spanish, Portuguese, German and Latin. 20 u l l Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the subtitle language you prefer. If the disc you are playing has that language available, it will displays subtitles in that language; There are 8 optional audio languages: Chinese, English, Japan, French, Spanish, Portuguese, German, and Off. l Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output mode you prefer. Press Enter to confirm; There are 3 optional audio output modes: ANALOG, SPDIF / RAW, and SPDIF/ PCM. ANALOG: From the Coaxial Output jack and the Optical Output jack, no signal is output. [. . . ]