User manual LA CROSSE TECHNOLOGY WS-8007U-O

[. . . ] 3) If there is no WWVB reception, manually set the time and date (see instructions in the Program Mode section). 5) Mount the WS-8007U in a suitable location where WWVB signals can be received. DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. Battery Cover Battery Compartment 3 A) MOON PHASE CLOCK 1) Remove the battery cover, located on the backside of the moon phase clock and directly below the function buttons. Note: After the batteries have been installed a tone will sound, and all the LCD's (Liquid Crystal Display) will briefly light up. [. . . ] 2) Press and release the "+" button to select the desired language. There are 3 languages to select from: US F E English French Spanish 3) Press and release the "SET" button to confirm the language setting and to advance to manually set the time. V) TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time. Note: When setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. 3) Press and release the "SET" button to confirm the hour setting and to shift to select the minutes. 6) Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 2) Press and release the "+" button to select the year (last two digits). 3) Press and release the "SET" button to confirm the year and to set the month. 5) Press and release the "+" button to select the appropriate month (January = "1", December = "12") 6) Press and release the "SET" button to confirm the month and to set the date. 8) Press and release the "+" button to select the appropriate date. 6 9) Press and release the "SET" button to confirm the date and to set the weekday. 10) The default weekday "MON" (depends on selected language) will flash. 11) Press and release the "+" button to select the appropriate weekday. 12) Press and release the "SET" button to confirm the calendar settings and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) The "12" hour time display will be flashing in the time LCD. 2) Press and release the "+" button to toggle between 12 and 24 hour time. Note: 12-hour uses AM/PM, 24-hour is also known as "military" time. 3) Press and release the "SET" button to confirm the 12/24-hour time display and to advance to select either °F or °C. VIII) SELECTING °F OR °C 1) The default "°F" will be flashing in the time LCD. 2) Press and release the "+" button to toggle between °F and °C. 3) Press and release the "SET" button to confirm the °F or °C selection and exit the Program Mode. FEATURES & OPERATIONS I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the date, seconds, and temperature: 1) Month & date/weekday/moon phase/indoor temperature (default) 2) Month & date/weekday/moon phase/second. [. . . ] 3) Place the moon phase clock onto the screws, using the hanging holes on the backside. MAINTENANCE & CARE · · · · · Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. Do not use solvents or scouring agents--they may mark and damage the displays and casings. Immediately remove all low powered batteries to avoid leakage and damage. [. . . ]