Detailed instructions for use are in the User's Guide.
[. . . ] 7022/7130
7022/7130
Advanced
INSTRUCTION MANUAL
Basic
Thank you very much for your purchase of the Konica 7022/7130. This Manual deals with making copies, correct handling of the machine, and precautions for safety. In order to maintain a satisfactory copying performance, please keep this Manual readily available for reference in the right hand rear pocket of the machine.
ENERGY STAR® Program
The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. has determined that this product meets the ENERGY STAR guidelines for energy efficiency grounding it on the following features.
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing unit. [. . . ] · Entering "0" or the same page number twice will be ignored on the screen. · When a page number entered is larger than the total original page count, it will be ignored.
Positioning Title Pages on the Right Side (Chapter)
Chapter is used with RADF in 1a2 or 2a2 mode for the purpose of locating title pages on the right side, rather than reverse side, of a duplex copy to improve the presentation of double-sided copies. To effectively locate the title page on the right, a blank sheet will be automatically created on the reverse side of a sheet, if required. title pages: 15 sheets, from 1 ~ 999 Incompatible Conditions: 1a1, 2a1, Group, Sheet/Cover Insertion, Combination, OHP, Image Insert, Dual Page, Repeat, AUTO Layout, Non-Image Area Erase
1-sided originals Copies in Chapter mode Title page 7 2-sided originals Title pages 8
Combination Application Selection Screen Sheet/Cover Insertion Chapter
Booklet
OHP
Image Insert
Dual Page
5
6
3
78 5 34 12
4
2
8 6 2
4
Mixed Original
7 5 3 1
Folded Original Non-Standard Size Flip Side 2 Text/Photo Enhance
6
1
Title pages
Title page
1.
Press [APPLICATION] on the control panel.
DATA
FAX HELP
Reverse Image Repeat
1
CHECK
2 5 8 0
3
INTERRU
4
APPLICATION
6 9
STAR CLEAR QTY.
7
OUTPUT
Applications
Frame/Fold Erasure AUTO Layout Image Shift
8
AUTO RESET
The Application Selection Screen will be displayed on the touch panel.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then press [AUTO RESET].
Reduce & Shift Non-Image Area Erase Stamp
Overlay
8-7
Positioning Title Pages on the Right Side (Chapter) (continued)
2.
Touch Chapter on the Application Selection Screen.
The Chapter Page Setting Screen will be displayed.
3.
Use the control panel keypad to enter the page number of each title page.
Touch SET after each entry to move to the next key. The entered number will be deleted.
DETAILS
· Entering "0" or the same page number twice will be ignored on the screen. · Chapter insertions occur in sequence even if original page numbers are entered out of sequence. · When a page number is larger than the total original page count, insertion occurs as the last page of the document.
OPTION
Touch Booklet on the Chapter Page Setting Screen to use this function. To change the selection of paper tray for copying title pages, touch Copy Insertion on the screen.
4. 6.
When all entries are made, touch OK.
The Application Selection Screen will be restored.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
8-8
8.
7.
Positioning Title Pages on the Right Side (Chapter) (continued)
Press [START].
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur.
· For details on positioning originals, see p. 3-24) when the original count exceeds 50.
Position originals FACE UP in the document feeder.
CAUTION
HINTS
8-9
Application Selection Screen
Applications
Non-Standard Size
Combination
Image Insert
Sheet/Cover Insertion
Frame/Fold Erasure
Image Shift
Non-Image Area Erase
Text/Photo Enhance
Flip Side 2
Dual Page
Reduce & Shift
8
Reverse Image
Chapter
Folded Original
Mixed Original
Overlay Booklet Repeat AUTO Layout Stamp OHP
Lay Out Several Pages onto One Sheet (Combination)
Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper (2 in 1, 4 in 1, or 8 in 1). (Normally the fixed size of Tray 1 will be selected. ) Incompatible Conditions: APS, Sheet/Cover Insertion, Chapter, Booklet, Image Insert, Dual Page, Special Original (Mixed Original, Non-Standard Size, Flip Side 2), Repeat, Frame/Fold Erasure, AUTO Layout, Non-Image Area Erase
4 in 1 copying 2 in 1 copying
Original
1 1 2 3
2
8 in 1 copying
1234 4 5678
1.
Press [APPLICATION] on the control panel.
DATA
FAX HELP
1
CHECK
2 5 8 0
3
INTERRU
4
APPLICATION
6 9
STAR CLEAR QTY.
7
OUTPUT
AUTO RESET
The Application Selection Screen will be displayed on the touch panel.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then press [AUTO RESET].
2.
Touch Combination on the Application Selection Screen.
The Combination Mode Selection Screen will be displayed.
8-10
Lay Out Several Pages onto One Sheet (Combination) (continued)
3.
Select the desired Combination mode.
Application Selection Screen Sheet/Cover Insertion Chapter
Combination
Booklet
OHP
Touch 2 in 1, 4 in 1 or 8 in 1, and select a key in the LAYOUT area, referring to the illustration on the following page.
Image Insert
4. 7.
Touch OK.
The Application Selection Screen will be restored.
Dual Page Mixed Original Folded Original Non-Standard Size Flip Side 2 Text/Photo Enhance Reverse Image Repeat
Touch OK on the Application Selection Screen.
The Basic Screen will be restored. When selecting any other tray, touch the desired tray key.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
Position originals FACE UP in the document feeder.
HINTS
· For details on positioning originals, see p. 3-24) when the original count exceeds 50.
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. 8-11
8.
Press [START].
Applications
Frame/Fold Erasure AUTO Layout Image Shift Reduce & Shift Non-Image Area Erase Stamp
8
Overlay
Lay Out Several Pages onto One Sheet (Combination) (continued)
DETAILS: Original Type and Layout Order
Refer to the table below to select the desired Combination mode.
Layout Original Portrait type 1 1 2 3 4 2 1234 5678 2 4 1 3 1357 2468 2 in 1 Horizontal order 4 in 1 8 in 1 Vertical order 4 in 1 8 in 1
Landscape type 1 2 1 3 2 4
1 3 5 7
2 4 6 8 1 2 3 4
1 2 3 4
5 6 7 8
8-12
Making a Multiple Page Signature Booklet (Booklet)
Use the Booklet function to make a multiple page signature booklet copied on both sides of the paper from any tray. Original images are scanned into memory and automatically arranged in booklet format in the correct order. Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2 mode; otherwise blank pages are automatically inserted to the last. Original Size: A4, A4R, or B5 Incompatible Conditions: APS, 1a1, 2a1, Staple, Group, E-SORT+sort, ESORT+group, Sheet/Cover Insertion, Combination, OHP, Special Original (Mixed Original, Non-Standard Size, Flip Side 2), Repeat, Fold Erasure, AUTO Layout, Non-Image Area Erase, Stamp (Page, Numbering)
Application Selection Screen Sheet/Cover Insertion Chapter
Combination
Booklet
OHP
Image Insert
Dual Page
1-sided originals
1 2 3 4
. . . . . . . . . . . . . . 47 48
Mixed Original Folded Original
Booklet copying
47 45 2 48 1
3
. . . . . . . . . . . . . .
46 3
25
Non-Standard Size Flip Side 2
24
4
7
. . . . . . . . . . . . . .
26 23
1
5
45
47
2-sided originals
2 4 6 8
Text/Photo Enhance
46 48
Reverse Image Repeat
1.
Press [APPLICATION] on the control panel.
DATA
FAX HELP
Applications
1 2 5 8 0 3
INTERRU
8
AUTO Layout
CHECK
4
APPLICATION
6 9
STAR
Frame/Fold Erasure
7
OUTPUT
Image Shift
CLEAR QTY.
AUTO RESET
The Application Selection Screen will be displayed on the touch panel.
Reduce & Shift Non-Image Area Erase Stamp
Reminder!
When starting a new copying job, be sure to close the RADF securely, then press [AUTO RESET].
Overlay
8-13
Making a Multiple Page Signature Booklet (Booklet) (continued)
2.
Touch Booklet on the Application Selection Screen.
The Booklet Mode Selection Screen will be displayed.
3.
Touch to highlight the desired Booklet mode key.
4. Select additional Applications, as desired.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
Select the 1a2 or 2a2 copy mode and the desired paper size.
AMS is selected automatically. [. . . ] Lock Job Memory Paper Type
Panel Contrast Key Operator Data Weekly Timer Touch Panel Adjustment Power Save Memory Switch List Print Application Customize Density Shift
KRDS Host
Key Operator Mode
11
11-45
[13] List Print
Use this function to print out the list selected from the following items. · Job memory list:Programmed contents of Job memory · User setting list: Machine information managed by EKC and home position settings selected by user · Font pattern: Font patterns used in the machine
Key Operator Mode Screen List Print Screen
Procedure
1 Touch [13] List Print on the Key Operator Mode Screen to display the List Print Screen. After completion of printing, the copier will automatically return to the List Print Screen. 5 If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.
11-46
[14] Application Customize
Use this function to rearrange, display, or hide the application keys on the Application Selection Screen.
Key Operator Mode Screen Application Customize Screen
Key Operator Mode
Item Selection Screen
File Edit Customize Screen
Image Edit Customize Screen
System Initial
Copier Initial
Preset Key
E. K. C. [. . . ]